domtas Posted January 19, 2017 Share Posted January 19, 2017 HiHas anyone used one of these...I cant figure how to set the boost level?Link to boost controller type i have.http://www.rhdjapan.com/blitz-dual-sbc-boost-controller-type-r.htmlThis is the link to set it uphttps://www.manualshelf.com/manual/blitz/sbc-type-s-r/manual-english.htmlIt looks very straighr forward in the instruction but i cant work it out... Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/ Share on other sites More sharing options...
V28VX37 Posted January 19, 2017 Share Posted January 19, 2017 4 minutes ago, domtas said: Hi Has anyone used one of these... I cant figure how to set the boost level? Link to boost controller type i have. http://www.rhdjapan.com/blitz-dual-sbc-boost-controller-type-r.html This is the link to set it up https://www.manualshelf.com/manual/blitz/sbc-type-s-r/manual-english.html It looks very straighr forward in the instruction but i cant work it out... The level setting is a % of maximum, not the actual boost. Start a low setting and work up from there. You can find my settings here, I'm running 1.4bar on an SS2: https://www.sau.com.au/forums/topic/23649-help-required-on-using-my-blitz-dual-sbc/?do=findComment&comment=7801321 Are you replacing an existing boost controller or starting from scratch? If latter, make sure your tune is providing enough fuel for the boost level you want to run. EDIT: Mine's the older model, your settings may vary but I'm guessing the logic might be the same Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7805837 Share on other sites More sharing options...
domtas Posted January 19, 2017 Author Share Posted January 19, 2017 I got this controller 2nd handIm running ext gate with 7psi spring and im hitting close to 12psi and i need to back off Settings on here areDuty 0Gain 10P-gain 0 Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7805844 Share on other sites More sharing options...
domtas Posted January 19, 2017 Author Share Posted January 19, 2017 https://www.manualshelf.com/manual/blitz/sbc-type-s-r/manual-english/page-11.htmlIt says while display flashing set boost....My display doesnt flashIt displays boost I can go settings for gain etc... Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7805851 Share on other sites More sharing options...
domtas Posted January 23, 2017 Author Share Posted January 23, 2017 Any in vic has one?I have disonnected it and running ext waste gate pressure with 7psi spring and it holds 5psi..I habe gone over the vaccum line diagrams over and over and its all lines up correctly.Im gonna try change vaccum lines and change manifold pressure source to different location to see if it works Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7806413 Share on other sites More sharing options...
robj Posted March 15, 2018 Share Posted March 15, 2018 Thread revival… Did you have any success? I bought a new one just recently, and my Control Panel won't flash either. Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7870246 Share on other sites More sharing options...
littlegee121 Posted May 3 Share Posted May 3 Hi did anyone sort this out as I have the dual sbc type r and my display does not flash and I cannot set desired boost pressure as per the instructions. Only duty, gain and p gain. Or warning boost pressure and limiter. Is it just full boost and you only set duty, gain and p gain and then warning boost pressure and limiter? Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7989496 Share on other sites More sharing options...
GTSBoy Posted May 3 Share Posted May 3 Duty sets the boost level. The duty number != boost, it is just a number between 0% doing something and 100% doing something. More number = more boost. Gain and p gain are used to help account for boost creep or drop off. The details vary from controller type to controller type (ie, the Profecs use similar terms but achieve their results slightly differently.) The manual should explain all that. These controllers are dumb in that they do not control to a boost target. They are open loop. You need to adjust settings until it is doing what you want. If the performance of the motor, boost control system, elevation, weather, etc change, then the boost can and will come out to a different result on the same controller settings. Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7989498 Share on other sites More sharing options...
littlegee121 Posted May 3 Share Posted May 3 Thanks for the confirmation, ok so now it makes sense, and so the instructions are incorrect for the module. Link to comment https://www.sau.com.au/forums/topic/468722-blitz-electronic-boost-controller-type-r-drama/#findComment-7989499 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now