Jump to content
SAU Community

Keep blowing boxes

ph4t32
 Share

Recommended Posts

ph4t32 Apprentice

ph4t32

Posted
  • Author
Posted

Hey guys i have a widebody r32 with 285's all round with 25ml spacers on back and a r34 neo engine with the 33 box and twin plate clutch making 340 on 20psi, and my boxes last maybe 100kms and start whining and another 100kms and 3rd gear has gone 3 times, ive done 6 axles and a half shaft in just under 5000k's and a centre bearing and clutch had to be sent away to be done because it started slipping.... my question is can any body help as to why im doing it?? i didnt clutch kick thor this box or drop it in 2nd or 3rd just fed it on and after 100k,s its whining already, it had a 2way cussco in it and i swapped it for a locked diff and need some ideas on what to check e.g gearbox and diff aligned right, measurements, heights, crossmember, etc etc ive read maybe its the clutch is to harsh. i think its a extreme brand i know its a twin plate, and is there anyone in vic i can take it to that can help me??? My mates box in a 33 lasted over a year with 530rwkw smashing it and it still hasnt blown, im on 3rd box and am its about to blow, im over it and need help pls guys,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      Much less twat-tastic. CF wheels are too garish for civilised use.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...