Jump to content
SAU Community

Recommended Posts

Brand new Rays Wheels 17"x9" +22 Gramlights 57DR with Advan Ad08 tyres

Rays Gramlights cast wheels 17"x9" +22 offset.  
5H PCD 114.3 
Matte Bronze limited edition colour

Wheels have concave spokes that easily clear Brembo brakes on R32 GTR.

May fit many other vehicles wanting a square setup - Skylines, EVO, S14,15 etc
Please do your own research for fitment and suitability to your specific vehicle.

Wheels are new in condition.  Not one scratch, scuff etc. 

Fitted with brand new fresh stock Advan Ad08 255/40 R17 high performance tyres.  Tyres still have knobby bits on tread.  Travelled less than 100km.

Purchased two weeks ago at $3300 AUD

Selling for $2890 ONO

IMG_9086.JPG

IMG_9270.JPG

IMG_9272.JPG

IMG_9293.JPG

IMG_9362.JPG

2BF5DB65-4334-4CC7-8AA0-929299566580.jpg

1B3C0266-2E5C-433D-A052-3C5267D29B16.jpg

More photos to tantalise the taste buds

In my opinion, 17" wheels on R32s are a perfect match.

Price $2800 ONO

IMG_9523.JPG

IMG_9524.JPG

IMG_9525.JPG

IMG_9526.JPG

IMG_9527.JPG

IMG_9528.JPG

PRICE $2600 NOW!!!

wheels have been removed from my carimageproxy.php?img=&key=4b1e78680f916b86

IMG_9661.JPG

IMG_9665.JPG

IMG_9666.JPG

IMG_9670.JPG

IMG_9672.JPG

IMG_9673.JPG

Edited by tangomatt

PRICE $2500 NOW!!!

wheels have been removed from my carimageproxy.php?img=&key=4b1e78680f916b86

Edited by tangomatt

I am bleeding for my hasty buying and wrong decision making on my car parts

Aaarrrgggghh

On Gumtree for $2600; SAU members for a bit less

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
×
×
  • Create New...