Jump to content
SAU Community

Recommended Posts

It's not a good idea to wind up boost with the stock ecu on that engine. This street racer found out the hard way.
image.jpeg.9311301220b89692b2b21a1944fd175c.jpeg

That pic suggests not enough boost as it was just bent, not a clean break, amateur at best[emoji12]
  • Like 3
19 hours ago, Dose Pipe Sutututu said:

will need fill custom dose pipe, going to be hard to find a 10" pipe and bends lol

Nah, grab some huge sheetmetal and roll it.

Easy af 

On 23/02/2017 at 8:10 AM, PatMol said:

Try skylines spares in Sydney he has neos on the shelf.

Thanks Pat, that did the trick!

Just paid for a Neo long engine, wasn't cheap but hopefully it will live up to the expectation.

Man there's a Neo drought out there big time...

  • Like 1
23 hours ago, V28VX37 said:

Thanks Pat, that did the trick!

Just paid for a Neo long engine, wasn't cheap but hopefully it will live up to the expectation.

Man there's a Neo drought out there big time...

So , question has to be asked....identified why you are knocking around the engine?  I  would expect a NEO to be very happy a the power level you are running

27 minutes ago, Roy said:

So , question has to be asked....identified why you are knocking around the engine?  I  would expect a NEO to be very happy a the power level you are running

Nope, we don't have a 100% clear answer at the moment. My suspicion is that what was originally identified as a blown HG (after much debate, since the evidence was inconclusive) ended up being a more sinister underlying issue with the engine. My best guess at the moment is a crack in the block but for a full diagnosis we'd have to tear down the bottom end and possibly crack test the block. I'm not interested in throwing any more good money after bad at the moment frankly, so we may be left guessing for a while.

And yes I've run it at 20psi / 275rwkw for a while, which is meant to be within the 'safe' range for a Neo. It died after about 8 track days so I'm wondering if there's a street 'safe' and a track 'safe' power level, and how different they might be... 

  • Like 1

Send me your tune file, I'll see what's going on there.

When I tune for track cars I always tune the entire mid range below MBT, taking at times 3 to 5 degrees out. This limits the amount of peak torque the motor can make thus keeping it together a little longer. Yes EGT goes up, but just richen it up close to 11 afr (on gasoline scaling) for E85. On 98RON I drop it under 11 afr. I don't aim for a flat AFR which most Internet experts like.

  • Like 1
Send me your tune file, I'll see what's going on there.
When I tune for track cars I always tune the entire mid range below MBT, taking at times 3 to 5 degrees out. This limits the amount of peak torque the motor can make thus keeping it together a little longer. Yes EGT goes up, but just richen it up close to 11 afr (on gasoline scaling) for E85. On 98RON I drop it under 11 afr. I don't aim for a flat AFR which most Internet experts like.

Thanks man will do! I've got the Consult cable but do I need a full version of the Nistune software to grab the tune?
3 hours ago, V28VX37 said:


Thanks man will do! I've got the Consult cable but do I need a full version of the Nistune software to grab the tune?

hrms.. good question, if not just do a screen shot of the timing table and roughly tell me which load cells it's hitting and/or what TP Load is roughly equal to what boost

8 hours ago, Dose Pipe Sutututu said:

hrms.. good question, if not just do a screen shot of the timing table and roughly tell me which load cells it's hitting and/or what TP Load is roughly equal to what boost

Looks like there is a trial version: https://www.nistune.com/index.php/support/software-downloads

I'll check it when I get the car back home, hopefully in two weeks or so...

Ok I may have a buyer for the original refreshed cylinder head, any tips on how to package up one properly for safe delivery?


Bubble wrap the f**k out of it.
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...