Jump to content
SAU Community

Recommended Posts

Pre-purchase jitters

Evening,

l need some advice from R32 owners. I've found a very clean original 93 GTR and have placed a small deposit. The car looks very straight, interior is immaculate and original, body is straight, motor looks original and clean, original tyres,basically the car looks legit for 30,000kms. Still has the rubber over the catch for the locks etc. On the hoist, chassis rails are straight underbody looks fine, the only drama l have is the wheel wells have the slightest amount of rust surfacing through the underbody sealer, is this normal  for Japan roads and is nissans body deadner crap in this area. The stock exhaust heat shields show rust as well but this is easily fixed!

i have a history check in progress as we speak with the auction sheets due back tomorrow, the kms have come back legit, with large gaps in the registration 5 years+.

 

if I'm allowed I can put up the link up for the car, for others to judge? The price is a premium but I'm happy to pay if all is correct?

Link to comment
https://www.sau.com.au/forums/topic/468869-pre-purchase-jitters/
Share on other sites

I think the car is what it suppose to be.........

If you are looking for 100% originality there are a few minor things that could altered to enhance the car.

Personally I hate the side blinkers in the front guards. I know that it is an ADR but quite a few importers and now conveniently forgetting to fit them. They should be fitted in line with the GT badge. It just looks crooked when they are misaligned.

The positive terminal should have a red protective cap, I paid about $8 for my last one.

The battery should have a plastic box surround.... Around $40.00.

The rear muffler whilst looking very close to original, is an aftermarket variant.

The bodykit is a bit disjointed, it has the N1 front bonnet extension but no nostrils in the front bar.

It has the 3 piece side skirts but no rear N1 boot extension under the spoiler.

Personally I'd remove the fitted pieces and have it present perfectly stock.

The footrest has some aftermarket metal add on.

So........ With all that said, from memory, this car was a 4.5/B Grade car when it went to auction in Japan.

Cars like this are fetching around 3.5 - 4.0 million yen in Japan. That equates to about A$59,000 in today's money landed, complied and registered.

If you want the car as a long term collectable then yes it's certainly worth the money. If you want to use it as a daily then forget about it.

Providing it hasn't been painted and all the documentation including the Japanese log book and owners manual is present then yes finding another car like this is difficult.
I own a sister car to this also white with 74,000 kms also a 4.5/B. I've invested a fair bit of time and effort into mine and it certainly is rewarding owning these time capsule cars.

BTW the original Bridgestone RE71 tyres is a nice touch....... Useless to drive on but sensational for a collector. If you buy the car, I'd be happy to buy you brand new tyres in lieu of the RE71's! Good luck, I'm sure it's a great car.

Bob.

  • Like 2
4 hours ago, R33gtst2016 said:

Sounds like a great car something you would really wanna hang onto. Just curious to know how you found the history on it considering the age of the vehicle.

 

There is a website and has been discussed in the importing section of this forum 

Google

japanesehistorycheck

 

6 hours ago, Aussie_Delivered_R32_GTR said:

I think the car is what it suppose to be.........

If you are looking for 100% originality there are a few minor things that could altered to enhance the car.

Personally I hate the side blinkers in the front guards. I know that it is an ADR but quite a few importers and now conveniently forgetting to fit them. They should be fitted in line with the GT badge. It just looks crooked when they are misaligned.

The positive terminal should have a red protective cap, I paid about $8 for my last one.

The battery should have a plastic box surround.... Around $40.00.

The rear muffler whilst looking very close to original, is an aftermarket variant.

The bodykit is a bit disjointed, it has the N1 front bonnet extension but no nostrils in the front bar.

It has the 3 piece side skirts but no rear N1 boot extension under the spoiler.

Personally I'd remove the fitted pieces and have it present perfectly stock.

The footrest has some aftermarket metal add on.

So........ With all that said, from memory, this car was a 4.5/B Grade car when it went to auction in Japan.

Cars like this are fetching around 3.5 - 4.0 million yen in Japan. That equates to about A$59,000 in today's money landed, complied and registered.

If you want the car as a long term collectable then yes it's certainly worth the money. If you want to use it as a daily then forget about it.

Providing it hasn't been painted and all the documentation including the Japanese log book and owners manual is present then yes finding another car like this is difficult.
I own a sister car to this also white with 74,000 kms also a 4.5/B. I've invested a fair bit of time and effort into mine and it certainly is rewarding owning these time capsule cars.

BTW the original Bridgestone RE71 tyres is a nice touch....... Useless to drive on but sensational for a collector. If you buy the car, I'd be happy to buy you brand new tyres in lieu of the RE71's! Good luck, I'm sure it's a great car.

Bob.

Appreciate it Bob, silly question to correct these items, can l get actual OEM Nissan part numbers from somewhere, is there a parts catalogue available or similar? Can you comment on my concerns of the underbody showing minor rust/ scaling in the wheel wells, is this a common thing for imports?

thanks again

You can find the parts here - http://jp-carparts.com/nissan/figlist.php?maker=nissan&type=79&cartype=51

Then type the part number into here - https://www.amayama.com/en

This will give you an idea of price but many parts are getting discontinued daily. There are also many suppliers you can pick from.

This amongst other reasons are pushing up the prices on clean original ones.

Minor rust or surface rust just needs to be dealt with but major rust can be a financial money pit.

I'm not an expert on this type of thing, my only thoughts are to get a PPI (Pre-Purchase Inspection) done on the car by someone who is trained in this area.

Maybe speak to a local panel shop and offer them $100 for a good look at the car. Should buy you a good hour.

On face value, the car looks pretty good so I'd be surprised if there was anything serious to be concerned with.

To be honest, I remember seeing this car when it first came up for sale. They had a silver one a friend was interested in and this one just arrived.

I remember thinking it was pretty neat but they wanted $65K at that stage. The A$ Aussie dollar has strengthened a fair bit over the last 6-8 months since they got it hence the reduction in price.

Let us know how you get on.

Bob.

2 hours ago, Aussie_Delivered_R32_GTR said:

You can find the parts here - http://jp-carparts.com/nissan/figlist.php?maker=nissan&type=79&cartype=51

Then type the part number into here - https://www.amayama.com/en

This will give you an idea of price but many parts are getting discontinued daily. There are also many suppliers you can pick from.

This amongst other reasons are pushing up the prices on clean original ones.

Minor rust or surface rust just needs to be dealt with but major rust can be a financial money pit.

I'm not an expert on this type of thing, my only thoughts are to get a PPI (Pre-Purchase Inspection) done on the car by someone who is trained in this area.

Maybe speak to a local panel shop and offer them $100 for a good look at the car. Should buy you a good hour.

On face value, the car looks pretty good so I'd be surprised if there was anything serious to be concerned with.

To be honest, I remember seeing this car when it first came up for sale. They had a silver one a friend was interested in and this one just arrived.

I remember thinking it was pretty neat but they wanted $65K at that stage. The A$ Aussie dollar has strengthened a fair bit over the last 6-8 months since they got it hence the reduction in price.

Let us know how you get on.

Bob.

Thanks for the advice Bob. On a positive note the dealer has been very accommodating and l can only speak highly of them, there is a large document/ receipt file with car and they had no concerns putting the car on the hoist in there shop. I would recommend them as a shop to visit.

27 minutes ago, dyl33 said:

Do you get to bring your own expert mechanic or do they supply that too?

 

The dealer has no problem with an independent inspection ( you obviously arrange). I'm not troubled by the quality, mechanicals or questioning the km's. The condition speaks for itself, my question is the sight of scale/ rust in the wheel wells, is this a normal thing for a 23 year old jap import ? The scale is slight pitting through the body deadner.

Edited by Sarahmorg
  • 1 month later...

That same dealer has quite a few cars with very low kms & very clean.

I was looking at at an R32 GTST4 with only 43,000kms ($23,000) and they could produce a Japanese import paper to prove kms.
Think the dealer is interested in high end cars looking at their prices. Id consider buying a GTR from them if I had the $$.

IMG_1489485798.669809.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...