Jump to content
SAU Community

Jeremy's A31 Cefiro

JaysCefy

By JaysCefy,
in Four door and wagon builds

 Share

Recommended Posts

JaysCefy Apprentice

JaysCefy

Posted
Posted

Jeremy's A31 Cefiro

Hey everyone. I'm new to Nissan's with this A31 Cefiro, but luckily, I'm in the motherland :laugh:. I just picked up this Cefy, and luckily she is old enough for me to take her with me when I have to leave in September.  Nothing definitely solid as far as plans for her yet, but I do kinda have a general idea.  For now I'm going to stick with the RB20DET she came with since that will make it easier for me to ship and import if I have to go back to the US.  So for now I'm looking to do cams, injectors, and a bigger turbo, along with a standalone ECU.  Haven't decided just yet on the interior, but I really like the look and feel of the Bride Euroster seats.  The car is pretty much bone stock other than some basic audio upgrades.  Anyway, here she is.

IMG_0277.JPG

IMG_0278.JPG

IMG_0279.JPG

IMG_0280.JPG

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/469054-jeremys-a31-cefiro/
Share on other sites
  • 1 month later...
JaysCefy Apprentice

JaysCefy

Posted
  • Author
Posted (edited)

Haven't been able to do much on the car lately other than acquire parts.  I did manage to put in a set of Splitfire coilpacks, replaced spark plugs, changed oil, and replaced the air filter.  So far I've managed to stockpile a set of LMGT3's in 17x9 4 lug, a set of S13 coilovers (HKS rear and KTS fronts), a Nismo 2-way (I need to find an ABS rear end though so I can build though so I can build the assembly then just put it in the car instead of the car being down for however long it takes me to do it), a Haltech Elite 2000 with patch harness, and a stock R32 GT-R crankshaft.  This is in addition to the body kit I bought from a friend, RB25 block and transmission.  So far the plan is to drop 26 internals into the 25 block and build for somewhere between 400-500 HP.  Also, I found out that I am going to Ramstein, Germany next, so I'll only be about 160 km from the Nurburgring.

Edited by JaysCefy
  • Like 1
Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

Someone with more knowledge than me should know if it's even possible (I don't think it is), do some googling. Plenty of people on here pushing 320+rwkw on stock rb25 internals. Just freshen the stock motor up and you'd be good to go. Putting a RB25 neo head on a 25 is just as good as having a 26, without the oil issues.

  • 2 months later...
  • 5 months later...
JaysCefy Apprentice

JaysCefy

Posted
  • Author
Posted

Sorry, for being completely AWOL on the thread lately.  Got busy getting ready to move and everything.

Status update:

Got the LMGT3's mounted but was slightly mistaken on the size. The fronts are 17x8 and the rears are 17x9

Also, ignore the flat tires, they were aired up right after the picture was taken.

The suspension will be sorted out once I get the car fully registered so that nasty wheel gap will go away.

Trying to decide what the next upgrade/project will be.  I have the Haltech that I can "install" since it only requires swapping two injector pins on the harness.  Has anyone used the supplied RB20 map to run a stock engine? I'm assuming for completely stock it should be pretty accurate.

I also have the Nismo 2-way that I can put together.  I kinda want to look at changing the ring and pinion to get a different ratio.  If I remember right the Cefy is 4.3 which keeps the revs a little high for autobahn driving.  I'd like to see about swapping to a 4.1 or maybe 3.9.  Has anyone done this on a Cefy and have can give me their take on it?  Hopefully I will be more consistent with working on the car now that I will be here for a few years.

cefy_nismos.jpg

  • 4 weeks later...
JaysCefy Apprentice

JaysCefy

Posted
  • Author
Posted

No real progress on the car since the Nismo wheels had a leak around the valve stems, so I'm waiting on replacements.  For now I'm using the original wheels with some cheap winter tires I picked up.  Once I get up to decent speed (90+ km/h) I get a lot of wind noise, so I'm looking to replace all the rubber door seals.  Does anyone know of a good place to source those from?  Also, I want to adjust the latch on the doors as a couple of them seem a little bit looser than I think they should be.  Anyone know the process for doing that?

  • 2 months later...
JaysCefy Apprentice

JaysCefy

Posted
  • Author
Posted

Minor update, I think my headlight stalk shit the bed. My headlights got to where they would switch on the high beams with no gauge lights. Checked the fuses and relays. Fuses were good and best I can tell the relays are good too.  Tried to clean the contacts in the switch and got one low and high beam to come on left side, nothing on the right side.  So anyone got an A31 or C33 switch they don't mind parting with? Needing something ASAP to get her back on the road. All other projects are sidelined until I can get this sorted out and I really don't want to attempt wiring in a toggle switch if there is absolutely any way to avoid it.  I found a post from Dorigecko about 8 years ago saying he had one, but that was 8 years ago lol.

  • 5 months later...
  • 2 weeks later...
JaysCefy Apprentice

JaysCefy

Posted
  • Author
Posted

@Swz3 Thanks.

Finally got off my lazy ass and did a little bit more work on the car.  Not having my own garage anymore really sucks.

I tracked down a new headlight switch and got that put in.  I also installed a USB port in the center console instead of having wires trailing from behind the head unit.  In addition to cleaning things up a little bit, it also allows two phones to be plugged in, one charging and one sending audio to the stereo.  I also finally got around to replacing the valves in my LMGT3s.  While I had the tires off, I split the center off and plasti dipped them black.  The wheels need to be refurbished anyway and I will get them professionaly powdercoated/painted then, but wanted to test the look for a bit before I spent that kind of money.  This weekend (hopefully) I will get around to putting the suspension on to bring it down a little bit.  We'll see what happens after that.

cefy.jpg

usb.jpg

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Milkmun
      Help Understand GTT Boost Setup

      By Milkmun · Posted

      Glad it all went smooth. How long did the tuning process take?
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • B-Boi34
      UniClutch

      By B-Boi34 · Posted

      I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...