Jump to content
SAU Community

Machined out turbine OP6 housing on Hybrid ..

Torques

By Torques,
in Engines & Forced Induction

 Share

Recommended Posts

Torques Mentor

Torques

Posted
Posted

Machined out turbine OP6 housing on Hybrid ..

I got the my OP6 hybrid back from the manufacturer but wasn’t too happy with how they machined the hole for the larger wheel.

For some unknown reason they did not machine right through the housing and left a 1 mm sharp edge on one side.

I think it will not impact the performance but on the other hand I don't understand why they left that excess material?

I see soot build-up on that edge right away :(  

 

Any input welcomed! :)

 

 

TTEDGE.JPG

Torques Mentor

Torques

Posted
  • Author
Posted

Thanks for the input!

I might be a bit picky with how work is done, but to me it looks like a no brainer to make as much space around the wheel as possible ..

 

And yes, I was thinking doing just that with a Dremel.

But the whole project had been going back and forth for a long time and I had the workshop appointment the next day.

So I didn't want to take housing off again and wasn't feeling like masking the wheel with gaffer tape and then possible sliding off with the Dremel (if you know what I mean)

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Goombeh
      Enkei RPF1 18x10.5 +15 - Vic pickup

      By Goombeh · Posted

      Hi, does anyone know how I can, or can a moderator remove this advertisement please.  Has been sold a long time ago and would like to remove references. Thanks. 
    • r32-25t
      R32 GTR clutch master cylinder adapters

      By r32-25t · Posted

      There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Duncan
      R32 GTR clutch master cylinder adapters

      By Duncan · Posted

      Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
×
×
  • Create New...