Jump to content
SAU Community

Recommended Posts

NO OIL PRESSURE

Hey guys new to the skyline scene always wanted one. I brought a 1994 r33 skyline gtst 3 weeks ago. I drove it home fine around 100kms away from home. I parked it in my driveway which is steep arse down nose up. Started the car to take it for a rwc and it ran okay but not the best. Got home and parked it nose down the driveway. Now the car has no oil pressure on the gauge and the lifters sound like they want to jump out of yhe engine. Checked inside the oil filler cap and looks like no oil getting to the top of the motor. Any ideas guys ? Im thinking oil pump but as i said new to skylines and not 100% sure. Any ideas would be useful guys.

1489447545422-1261200894.jpg

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/
Share on other sites

Don't always trust the oil pressure gage. At best it gives an indication. Sometimes the gage or the oil pressure sender just fails.

Obviously don't drive it until diagnosed correctly. Get another gauge on it and test it and go from there.

Yes it could be the oil pump, or it could be something else.

If your still talking to the previous owner it wouldn't hurt to ask the history.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7817392
Share on other sites

Sounds like you may have been duded. Highly likely the previous owner has had it checked out and may know the issue (and cost to fix).

Get a good mechanic to go over it now.

Obviously would have been best to do this ^ before parting with your hard earned!

We live, we learn

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7817411
Share on other sites

  • 2 months later...

Sorry for late reply been busy with work and working on the car. I almost gave up but doing things right. Even on flat surface car was still noisy. Gauge read nothing on cold start and once warmed up, also no oil warning light lights up. I have picked up another working good motor which im in the middle of putting in. God dam a engine swsp on these things is pretty intense lol. Thanks fot you help guys.

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834366
Share on other sites

Thanks mate. Seen this motor working perfect b4 pulled out so I know its a good one. Bigger job than expected though motor replacement. I can have a commodore motor out and back in 2 hours lol. This has been nearly a month to get this far. Just wanna make sure its done right. Plus mechanics wanted $3500 to replace the motor with me buying a motor to go in.

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834374
Share on other sites

23 minutes ago, Disturbed Paulie said:

Thanks mate. Seen this motor working perfect b4 pulled out so I know its a good one. Bigger job than expected though motor replacement. I can have a commodore motor out and back in 2 hours lol. This has been nearly a month to get this far. Just wanna make sure its done right. Plus mechanics wanted $3500 to replace the motor with me buying a motor to go in.

About $1.5k-$2k too much^

Take your time and ask questions on SAU if you get stuck.

It really peeves me how others can sell a lemon.

 

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834377
Share on other sites

Yeah mate i did no oil pressure at all. No oil in the top end of the motor looks clean like its just been degreased and dry even after motor running for 30 secs to min max( didnt wanna run it longer motor sounded like it was gonna fall apart ).

Link to comment
https://www.sau.com.au/forums/topic/469608-no-oil-pressure/#findComment-7834614
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Gabriel, and thanks for saving one of the less famous cousins!
    • Wanting to avoid this if possible but kinda looking like I may not have a choice 😭
    • Ok awesome thank you. Just wanted to have them in case I can find some and need to compare part numbers!
    • All I can say Duncan is good luck and I hope that Neil did not run any E85 in Cheryl. I have recently experienced the full spectrum of fuel tank issues in my R33's that had been caused by E85 and contaminated fuel. When you take the cover off the top of the tank and have a look inside you will get an understanding of how easy it will be. Best case situation is clean fuel with minimal contamination. My GTR was like this and it was a very simple operation to just grab the fuel pump carrier bracket and slide it up and out of the tank. My three GTS_T's had different levels of fuel contamination that was probably caused by E85 in the fuel.  In the worst case all of the metal components in the tank had rusted to the point where there were pieces of rusted metal swirling around in the tank. This required the removal of the exhaust, the tailshaft, the complete rear cradle and the fuel tank. The components in the tank were that rusted that it took days to get the fuel pump carrier and the mounting brackets out of the tank. When the tank was finally cleaned, everything inside the tank had to be replaced. With the tank all back together I could then reinstall it in the car along with everything else that had to come out. Good luck and I hope that you find a clean tank.    
    • It is a two door. It is black and also still has the OEM wheels and stereo. Exact model would be KR_R32RGFEL_SS According to GTR-Registry.com is a 2 Door Coupe; RB20DE; 2WD no HICAS; MT.F5; (11L) Projector Headlamps and Fog Lights; (12_) Electronic Active Full Auto Air Con (Climate Control); (13-14SS) V Selection -- Which seems to be accurate description of my variant. Will try to upload a few pictures soon. The OEM wheels look like the below image. Image is taken from the goo-net-exchange website.  
×
×
  • Create New...