Robzilla32 Posted March 24, 2017 Share Posted March 24, 2017 Alpha Omega Racing. You posted a link from their site earlier so I figured that you had seen their kits. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7819808 Share on other sites More sharing options...
No Crust Racing Posted March 24, 2017 Author Share Posted March 24, 2017 Ohh lol yes. Yeah could be done cheaper quite easily.Brackets are nice though. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7819812 Share on other sites More sharing options...
Robzilla32 Posted March 24, 2017 Share Posted March 24, 2017 I bought the full kits from them as I had very tired original GT-R gear and AOR looked after me price wise but you can just pick the parts you need and BYO the rest. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7819872 Share on other sites More sharing options...
Dose Pipe Sutututu Posted March 27, 2017 Share Posted March 27, 2017 Don't forget, R34 uses 14mm bolt holes.. so.. the AOR kit will need bolt sleeves OR tapped out to accept 14mm bolts. Then.. your brake balances will be aids, we have set this up on a S15, running a BM57 and R33 GTS-t rear calipers. Car doesn't stop as well as my piece of shit GTS-t rust bucket running just basic 350Z Brembo calipers (same shit as R34 GT-R just offset a few mms out), not to mention it weights more. 1 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820279 Share on other sites More sharing options...
No Crust Racing Posted March 27, 2017 Author Share Posted March 27, 2017 Good to know. I'm surprised balance would be that far out? Sounding a lot easier to just paint the current calipers red and get some fresh vinyls as was suggested earlier lol Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820281 Share on other sites More sharing options...
Dose Pipe Sutututu Posted March 27, 2017 Share Posted March 27, 2017 weighs, strong auto correct lol. Yeah man, paint + stickers. Spend the rest on cocaine and strippers. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820326 Share on other sites More sharing options...
niZmO_Man Posted March 28, 2017 Share Posted March 28, 2017 Stop being a pussy and buy one of these http://www.jdl-brakes.com/nissan/nissan-skyline-r32-r33-r34-gt-r/brake-kits.html 2 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820538 Share on other sites More sharing options...
No Crust Racing Posted March 28, 2017 Author Share Posted March 28, 2017 I like. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820574 Share on other sites More sharing options...
Piggaz Posted March 28, 2017 Share Posted March 28, 2017 Awesome bloke to deal with. Just prepare for butt reeming at customs! Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7820577 Share on other sites More sharing options...
Roy Posted March 31, 2017 Share Posted March 31, 2017 The Evo brakes have pretty big pistons which is why on paper they will make for bitey brakes. Though plenty of people running them and happy You have an R34...if you are doing brakes be a man 5 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821361 Share on other sites More sharing options...
No Crust Racing Posted April 1, 2017 Author Share Posted April 1, 2017 You only turn up in my threads when you wanna sell me something lolDoesn't need hektik brakes - street car. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821428 Share on other sites More sharing options...
admS15 Posted April 1, 2017 Share Posted April 1, 2017 That would be a real upgrade though and add value + e fame 1 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821448 Share on other sites More sharing options...
No Crust Racing Posted April 1, 2017 Author Share Posted April 1, 2017 I guess yours are already on order then Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821451 Share on other sites More sharing options...
admS15 Posted April 1, 2017 Share Posted April 1, 2017 They're worth more than my whole car but yolo why the he'll not[emoji43] Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821495 Share on other sites More sharing options...
Roy Posted April 4, 2017 Share Posted April 4, 2017 On 1/04/2017 at 3:31 PM, ActionDan said: You only turn up in my threads when you wanna sell me something lol Doesn't need hektik brakes - street car. Hey you ignore all my advice anyway. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821865 Share on other sites More sharing options...
No Crust Racing Posted April 4, 2017 Author Share Posted April 4, 2017 What advice? I haven't heard from you in yonks, last time we spoke I bought those LCA's and Roll Centre Adjusters from you.. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821868 Share on other sites More sharing options...
Dose Pipe Sutututu Posted April 4, 2017 Share Posted April 4, 2017 Get some Intima SR pads for the GT-R, whilst you're at it.. get a full set of Hel Braided lines 2 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821883 Share on other sites More sharing options...
No Crust Racing Posted April 4, 2017 Author Share Posted April 4, 2017 Still plenty o meat on the Ferodo pads in there, even if they're dusty AF. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7821885 Share on other sites More sharing options...
_Wing_ Posted April 4, 2017 Share Posted April 4, 2017 On 27/03/2017 at 3:10 PM, Dose Pipe Sutututu said: Don't forget, R34 uses 14mm bolt holes.. so.. the AOR kit will need bolt sleeves OR tapped out to accept 14mm bolts. Then.. your brake balances will be aids, we have set this up on a S15, running a BM57 and R33 GTS-t rear calipers. Car doesn't stop as well as my piece of shit GTS-t rust bucket running just basic 350Z Brembo calipers (same shit as R34 GT-R just offset a few mms out), not to mention it weights more. They're made specific to each car, if you're talking about the Alpha Omega Racing stuff, so if he has an R34 GTR then he buys the R34 GTR kit and bolt it on. Other than the bending (I prefer completely removing) the backing plate to make room for a larger rotor - which you must do for all brake upgrades - they are 100% bolt on, no sleeving no tapping no modifying whatsoever... provided you buy the right parts for the car. Bias wise any front-only upgrade will move the bias forward - that's a given. Standard R34 GTR bias is 70:30 and R34 GTR NUR-spec bias is 68:32. With the matching front and rear upgrade the Evo 350mm Brembo bias is 69:31, this makes it a perfectly perfect bias. All the technical specifications are listed and also within contains a link to a 3rd party bias calculator for you to verify: http://alphaomegaracing.com/p/149/c/72/Z32/ALPHA-OMEGA/Evo-350mm-Brembo-Rear-Brake-Adapter-Kit-WTAC-Edition.html If someone like Dan upgrades his R34 GTR to front and rear Alpha Omega Racing braking stuff, there are well founded reasons to believe the car will consistently brake/stop in a shorter distance + be more stable over any duration + have longer rotor and pad life. I hope that information is helpful for somebody reading, cheers 1 Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7822057 Share on other sites More sharing options...
No Crust Racing Posted April 4, 2017 Author Share Posted April 4, 2017 Much appreciated. Link to comment https://www.sau.com.au/forums/topic/469616-evo-calipers-on-34r/page/2/#findComment-7822079 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now