Jump to content
SAU Community

Recommended Posts

Second knuckle went OK, looks like I was a touch quick on the travel speed, but I imagine they will look ok once cleaned/painted up which will be next on the list as I wait for the sphericals and rotors to arrive.

I think in future I might not try and clean up/smooth the weld afterwards, I think it kinda looks better without it (not that you will see this). 

20211130_205333.jpg

20211130_205356.jpg

20211130_205558.jpg

20211130_211215.jpg

20211130_211857.jpg

20211130_212529.jpg

20211130_212933.jpg

  • Like 3
On 11/8/2021 at 2:02 PM, ActionDan said:

Not bad. All new pins/clips, seals etc, powder coated black for a bit over 1k delivered for the set. 

Have GKtech weld on rear caliper adaptors to go on also. 

Buy my old my old brakes or dash/interior :D
 

250572681_942159646389155_4501093686822060037_n (1).jpg

250711758_933802697343096_3468188448816228505_n.jpg

So you went with full 350Z brembo kit front and rear? I'm still interested in your whole dash/interior but last we talked you weren't keen to sell, have you changed your mind 😁

On 12/2/2021 at 3:55 PM, iruvyouskyrine said:

So you went with full 350Z brembo kit front and rear? I'm still interested in your whole dash/interior but last we talked you weren't keen to sell, have you changed your mind 😁

Completely forgot, yes it's all for sale. 

 

 

  • PranK changed the title to S13 Sprint/Time Attack Style Build

Head is back, builder sent this and said he will do some light polishing to finish it off but is very happy with the result. 

I asked about it looking so textured he said "Its actually pretty smooth. That's just toolpaths so looks more pronounced depending on angle. OEM is 10x the texture of this"

I didn't take any pics of the head before I sent it but have included a stock image from the interwebs, look at the casting marks on the last cyl far right 0_0

 

  


 

263398866_4490665514315443_8862123003544915362_n.jpg

image.png

  • Like 1

I reckon these came out half decently.

New bushes should be here next week then I can pop the hubs in and put the knuckles back in the car while I wait for the rear rotors.

#NoCrustFabrications lol

20211207_200801.jpg

20211207_200920.jpg

20211207_200946.jpg

  • Like 2
On 12/7/2021 at 8:43 PM, robbo_rb180 said:

Nice work, did you decide on a rotor and pad setup yet?

 

HFM 2 piece fronts and DBA T3 rears. 

Pads will be Intima Type RS front and either Type D or SR rears as Johnny and I were discussing bite vs progression in the rear pad. 

Will just take a guess as I wont know what the balance is like until we get out there, I had considered putting in a basic balance adjuster though.

On 12/7/2021 at 7:38 AM, iruvyouskyrine said:

I will send you a message later today then!

Just had an FB message for gear shift surround and door cards so if you are keen let me know

On 13/12/2021 at 10:02 AM, ActionDan said:

f**k Michael Massey. 

That is all. 

Lol, not a max fan then. What a farking debacle. There's rules and then there's rules..

 

Nek minnit, Massey demoted to officiating Aus world time attack.

  • Like 1

I feel like I must be the only one that thinks Masi got it absolutely right. The only thing I think he could have done better would have been being a touch more decisive and not changing his mind on the back markers, but otherwise I think he made absolutely the right call and I'm glad he did change his mind. End of the day, there aren't any absolutely clear cut rules for that situation and the race controller needed to make a decision in seconds. The decision he made was the better one for the sport - it ended in a race, rather than a parade.

I look at it like this: 

1. As a complete neutral, that was an ending that befit the most exciting season of F1 that I can remember. If that adrenaline pack of a season had finished behind a safety car, that's where I think the sport would have suffered. 

2. If Mercedes had decided to pit Lewis with the SC and Max had stayed out and got track position - Mercedes would be ecstatic with Masi's call. One of them had to lose, one of them was always going to be upset. I think this taking it to the lawyers business is bullshit, sporting events have no business in a court room. 

3. In my opinion, Hamilton had an unfair advantage from Lap 1. Max stayed in the white lines, he didn't make contact, for me that was proper balls-out racing and what everyone wants to see. How the stewards thought Lewis gave that advantage back is fkn beyond me, he went from a situation where he should have conceded the corner to being nearly 2 seconds out in front by skipping T2. 

Nah not a Max fan, not really a Lewis fan either, but my boy Danny wasn't going take a WDC this year so I wanted to see Lulu take an 8th.

I agree he made the right call to remove those cars and let them race, finishing under race conditions is always preferred, but the biggest issue is that call came AFTER a prior call that they would NOT be removed. 

I know Merc missed pit entry simply due to timing of the SC, but had they said straight up lapped cars would drive through, as been the case this season pretty much every time, Mercedes could've pitted on the next lap, lost track position yes, but been behind max on brand new super softs also for a proper lap of balls out racing.

BUT, that is hinged on whether Lewis gets to retain P2 or does he end up at the back of the train and has actually given away a bunch of spots? I know there's no overtaking under safety, but do you still lose positions if you pit? 

Otherwise they would be assuming that yes Max has new tyres and those cars in between will be blue flagged but he still has to clear 4 of them who are fall fighting for positions themselves, that will slow him down and he only has 1 lap. Then last second, lapped cars between Max and Lewis please go, SC in this lap, go racing boys! 

Anyway, that flip flop pissed me off, hard to choose a strategy if things are changing that fast at one mans discretion. 

Re the Lap 1 incident I am on the fence, When they said he had given back the advantage, I took that to mean Lewis was about 1.5s ahead before max just decided to bomb the braking zone and force Lewis wide, yes he made up that time under brakes, but only did so by forcing another driver off. 

Lewis lifted and the gap came back to 1.5s, then he got back on the sauce and gapped him flat out. 

Also, "It's called motor racing, we went car racing" is perhaps once of the dumbest things i have head in ages. All of Australia should be ashamed it was uttered by one of our own. 

If I was Toto, I would also be in stunned disbelief. 

And yes, best season we've had in YONKS. Can't wait for March :D

 

Edited by ActionDan

It was a great season, but Lewis absolutely deserved the win. It shows how silly the rules are - Why not line the cars up on the grid and let them launch with the time intervals they had from one another once it is safe to do so, preserving the gaps, and positions they had on track once the track is again safe?

There's no reason a safety car has to actually influence the race result at all

Lewis missed Lap 1 because obvious Max stupid Divebomb is obvious. They let that one go because they could see between the lines in the spirit of the race. They should have let it end properly under the safety car because lets be honest, even after the 'should be illegal' blocking of Perez on HAM, he still opened up the gap again and absolutely would/should have taken then W there.

There's no way that they weren't artificially influencing the result, and it was influenced many times in favour of Max, which is where the Robbed comments come from, and as mentioned before, the concept of racing safety influencing the result of said race is just a stupid concept.

This just in from engine builder. 

Nice and thick base and flange he said, did note he wouldn't mind adding more slots/louvres to the channel tray to allow more/faster exit. 

image.thumb.png.858d21ad97f2bb2f0c5f283fcc70db71.png

So I guess this is now a Le Mans build ok?

263489969_612171910024418_7514998706829560152_n.jpg

265512779_1112001019552951_5525957353121378683_n.jpg

266335539_433003481894977_1350313185882386615_n.jpg

image.png

On 15/12/2021 at 8:12 AM, ActionDan said:

Picked up the dah I intend to try and hack up. 

Still has an airbag, do I need to remove this or can I just disable it? 

 

20211215_063608.jpg

20211215_063621.jpg

 

If it's the entire system, I would remove it, there's a lot of weight in it. If the activation system has been removed and it's just an empty airbag under the dash then just leave it.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, does anyone know how I can, or can a moderator remove this advertisement please.  Has been sold a long time ago and would like to remove references. Thanks. 
    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
×
×
  • Create New...