R33 GTR Cluster Problem

[R33Vspe.c]

Hi

I tried to change my disks from my cluster into an 300 km/h version.
Unluckily 3 needles (Rev counter, oil pressure and water temperature) came out with their shafts
Had to heat up the plastic and metal to separate them -.-
After replacing the disks and putting everything back together I tested the cluster.
Rev counter, oil pressure and water temperature showed values, but didnt went back in starting position when I turned off the car.
I think the springs relaxed when the needle with shaft were removed

Is there any chance to tension the springs again?

Thanks

Edited March 29, 2017 by R33Vspe.c