Jump to content
SAU Community

Recommended Posts

Some one ask me what a TD27T looks like in a R32

So some one got a little drunk and made a bet that a TD27T in a skyline wouldn't be sick........

so here's the project so far just because I wanted some were to share my progress ;) 

 

started off with a Hcr32,hicas all removed and swapped out with factory non-hicas lines and subframe, welded diff, as much weight removed as cheaply as possible 700kg chassis as it sits without a motor.

picked up a factory as frig TD27T out of a terrano, 2WD Navara turbo gearbox and a S14 SR20det cross member. 

Not sitting in her final resting spot yet. Just waiting on engine mounts to turn up. But hopefully over the long weekend I'll get some more done ;)  

 

IMG_1020.JPG

IMG_1024.JPG

IMG_1025.JPG

  • Like 3

It won't rev like a 20 but if it smokes a set of tires at idle then I'll be happy as a pig in sh*t...

so update : SR20det crossmember with SR20det engine mounts bolts straight into a r32 ( I didn't not know this haha )

td27t with the 4x4 engine mounts bolt up to factory SR20det mountings.... its like Nissan wanted a TD in a Silvia.....

 

 

IMG_1048.JPG

IMG_1049.JPG

So i have a issue. Between the crank and steering rack I have say 30mm of clearance. 

This shouldn't issue me except for the fact the sump is getting cut the f*ck up.

the RWD sump I have not much of it will be left except for the rear section the oil pickup goes in. 

If I use the 4x4 sump I'll have the big dropper at the back.

is there a don't make your sump smaller than this guideline?  Or am I just over thinking issues?

ahh, here:  http://www.caradvice.com.au/506503/nissan-australia-secures-future-for-local-manufacturing/

A small Kangaroo cast into the finished product identifies all the components cast in the Australian factory.

I hope this thing is going to go down the path of some of those Euro diesel drift boy setups (Benz, BMW).

Give it a big turbo, 50psi boost and plenty of fuel.  Still won't rev but ought to make enough torque to screw clutches and gearboxes with ease.

Watching with interest.

Edited by Dale FZ1
7 hours ago, Dale FZ1 said:

I hope this thing is going to go down the path of some of those Euro diesel drift boy setups (Benz, BMW).

Give it a big turbo, 50psi boost and plenty of fuel.  Still won't rev but ought to make enough torque to screw clutches and gearboxes with ease.

Watching with interest.

got given a Garry turbo the other day off a 13b. Exhaust housing is tiny. Intake is a little bigger than A/R 50...

and I'll slap my Nisbro 1 way ARC diff back in once she's road legal ;) 

 

th kangaroo subject is rather interesting.

I forgot to to say why I came back on...

motor all bolted down clutch is on. 

Waiting on top mount turbo manifold and intercooler to turn up.... gearbox going in tomorrow.

power steer lines have to be cut.

power steer pump relocation to divers side to suit TD mounts. Lines a lot shorter. Fluid tank moved to battery location. 

4x4 sumo clears the rack... needed some encouragement with a 20oz hammer tho. 

Starter mould on bell housing extremely close to fire wall... 20oz hammer. Problem solved. 

15 hours ago, XRATED said:

This needs a 100hp shot of nitrous/propane mix.

 

f**k yes......

 

11 hours ago, Dale FZ1 said:

Amazing what a hammer can fix.

Mate a hammer is the on,y thing that can fix stupidity. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...