Jump to content
SAU Community

Recommended Posts

Hey guys, recently got my R33 S1 headlights retrofitted with quad projector headlights complete with white LED ring angel eyes and red demon eyes. I bought a used set of headlights with yellowing lenses for cheap and sent them up to Sydney to be modified by That Headlight Guy. Needless to say, I was very impressed by his work and the results are amazing. He does work on all types and makes of headlights and even headlights that don't come standard with projectors! Very friendly guy to work with, his attention to detail is especially helpful, he will keep you updated throughout the build process and will even offer headlight lens restorations! 5 stars and will recommend to anyone wanting to do any sort of modification and/or restoration to their headlights!

Here's his page: https://www.facebook.com/thatheadlightguy/

 

IMG_4671.JPG

IMG_4676.JPG

IMG_4670.JPG

IMG_4674.JPG

IMG_4678.JPG

IMG_4677.JPG

IMG_4679.JPG

Edited by AeroZR
Link to comment
Share on other sites

5 hours ago, cul8er said:

Hmm I was thinking about doing this too what's the price ?

Depends what you need done. Additional angel eyes and demon eyes will add more to the cost, and how ever many projectors you need fitted will be taken into account. Extras like lens polishing and restoration will also add to the cost. Send him a message and he will be able to give you a quote.

  • Like 1
Link to comment
Share on other sites

On 5/4/2017 at 4:24 PM, niZmO_Man said:

C'mon man, output shots of it fitted to your car :D

How are they switched? Selectable or always quad? Either way, huge improvement over shitty PnP kits.

Hahaha I'll get around to getting night shots eventually! She's been a major garage queen lately :P

They are direct plug and play into the existing headlight plugs. I had to install a relay kit on each headlight as the low beam and hi beam must both be powered at the same time for the bi xenon projectors to work - The standard plugs did not allow for this and when you activated the hi beams, you would completely lose power to all the lights. The relay kit fixed this issue completely. As for the angel eye LEDs, they are simply spliced into the parking light wiring and I wired the demon eyes to a separate switch in the cabin, powered by splicing into accessory (They only work if the car is on accessory or running but you can also power them directly from the battery if you wanted). They are always quad and the ballasts are simple to bolt in.

Edited by AeroZR
Link to comment
Share on other sites

Ah so perma-quads. Mini H1? The Morimoto 7.0 is great width but the hotspot is typical H1 'spot' (which is one of the reasons I'd always go D2S over H1, bulb shim/quality is the main one). But running quad 7.0 should sort out that narrow hotspot "issue" haha. I hope you're running 35W on them.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...