Jump to content
SAU Community

Recommended Posts

 

gtx 3582

tial stainless steel a/r 1.0 ($650 is seep on these housings)

 

PERFECT CONDITION

 

these were on a v8 so obviously not much boost was put through them, 18psi was high boost that was used a few times, all the rest of the time was 14psi.

 

front housing not included as these are small housings machined to fit because we were low on space (or you could have them if you think you'll use them)IMG_1493690544.942732.jpgIMG_1493690566.114547.jpg

 

1500 ONO each

0404301881

 

Link to comment
https://www.sau.com.au/forums/topic/470274-2x-gtx3582tial-2000km-old-sydney/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
    • Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
    • Such a shame places like Amaroo Park have been redeveloped, smaller tracks always make for good racing. Cheers for sharing @PranK there's some good Lakeside video's too. Its so hard with older the cars as parts are so rare and everything was made for a particular chassis at that point in time. Even the V8 Supercar Blueprint era cars are all different between each chassis within a team as they learnt things and made improvements. The COTF cars between each Chassis builder is different too especially motor/oil systems/intakes. The Group A stuff is worth so much too especially chassis with good history. The only way to do it would be composite panels and similar engine drivelines to the original cars. Ford sierra running Focus RS driveline, Commodore running a short stroke LS/LT or a Falcon with coyote and a H Pattern dog box. Could use a standard ecu across all models with a Torque Map and DBW for parity which is not even used in Supercars currently. Hell a TCM is almost a full chassis car these days and the suspension is not even close to standard style in the front running cars.  
    • Dashcams Australia (13/05/25) captured JDMHSE (Vic plate) being a right tosser. 
×
×
  • Create New...