Jump to content
SAU Community

Recommended Posts

can somebody please help me?

i need ideas to mount my 6 x 9s on the parcel shelf .

maybe mdf for space and carpet it or something....please help!!!

I got autobarn to do mine. Cost me $130. Made from MDF and carpeted. They mounted the 6"*9" at an angle inwards so they did not have to cut any structural parts. I think it loofs Phat. And I didn'y have to settle for 6.5".

I love my Kenwood speakers!!

$130 bucks was a bit rich but they had to remove the old one and make and install the new and mount and wire the speakers. I am a pretty busy guy so thats the price you pay!!!

here are some pics attached. Hope it helps

Cheers,

J-Flash :rolleyes:

I got autobarn to do mine. Cost me $130. Made from MDF and carpeted. They mounted the 6"*9" at an angle inwards so they did not have to cut any structural parts. I think it loofs Phat. And I didn'y have to settle for 6.5".

I love my Kenwood speakers!!

$130 bucks was a bit rich but they had to remove the old one and make and install the new and mount and wire the speakers. I am a pretty busy guy so thats the price you pay!!!

here are some pics attached. Hope it helps

Cheers,

J-Flash :rolleyes:

P.S. Itried to upload the pictures and did that but they won't come up.

If some one can explain it I will reload em

P.S. Itried to upload the pictures and did that but they won't come up.

If some one can explain it I will reload em

go to advanced and manage attacthments, browse choose ur photo OK, that should upload them, it will tell you if you have done it or not, make sure they are not to big, 100kb is the size limit..

back to the point, I have the same made for my car so I dont have to have ugly spacers, just didnt ever get around to put in carpet or anything over it, i just spray painted it black .. will do it one of these days :headspin:

I managed to install a set of 6x9's in my R32 without cutting the shelf. All I did was make a set of spacers from mdf and modified them a bit to accomodate the irregularities of the parcel shelf. I did have to adapt the 6x9's a bit but nothing major. Took about 2 hours all up and hay presto. 6x9's in the door and int he parcel shelf without cutting a thing.

just letting anyone who wants to know.... i have 7X10's... Kenwood, in the stock parcel shelf.... with no cutting of metal, they fit and dont let anyone tell you any different... there is at least a 1/4 of a mm of room on around the magnets and until i moved the battery about 1mm of clearence over the batter bolts!!!

  • 2 weeks later...

Hey, how's it going, I have Alpine Type S 6x9's mounted in the back off my car, and all that had to be done was shave a SMALL portion of the metal away ... it depends what 6x9's you buy, some have small magnets, others, like the Type R's have a huge magnet and needs more cutting ... I'll put up photo's soon - well, as soon as I get my damn camera back :

Smeags ...

Have to agree with pooski.

I have 6x9's in R33 rear shelf without cutting or MDF. Just needs to be angled right to follow the "D" cutout of the body.

El Bee

Hey wat type of 6x9's do u have in yours? I'm after pioneers, just not sure if it fits without out cutting any metals (as i heard that it is illegal to do so).

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks! Will get it looked at before winter 🥶 other than that she's a mint ride love it aye 
    • FWIW a lot of the local owners that do a big build tend to have cars that are perpetually broken. 
    • I just got this system but haven’t installed yet I got a Moroso sealed box (defect reasons) which will be set up same as their pic The quality is high grade, the correspondence I had with the owner (former head designer for Rockford Fosgate) was unbelievable, guiding me with what I needed. Even told me not to buy some things as it could be sorted in a different way at his loss. Just a bit of a bite with the exchange rate and don’t purchase gear in 1 hit that goes over $1,000 au, lol I forgot!  
    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I eliminate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for? (Apple car play? Android air play)? so If I swapped head units to save using a band expander, I’d likely lose those better features to have an oem Unit operational. Better to use a band expander and retain AirPlay options and newer version of head unit     provably best to band expand it, and focus on the nav unit. th isn’t  a big deal/ would be cool to have it working  from what I can tel we use a PAL Signal and Japan uses a NTSC signal  I don’t know if there’s a co better or if the screen only reads NTSC, or if it’s the tv module that needs replacing… no big deal don’t need it but more of a curiosity thing on that!   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
×
×
  • Create New...