Jump to content
SAU Community

Recommended Posts

37 minutes ago, WantGTR said:

Gas is just like the icing on the cake. A single fogger wet system is easy and cheap to setup. 

You can still have a crisp AF na screamer.... with an ace up your sleeve ?

Having an n14 before i regularly check this thread lol

You're more lebo than I thought haha

10 hours ago, Dose Pipe Sutututu said:

You're more lebo than I thought haha

it made 50% more power for $1400. cant beat that. Thats nitrous kit (NOS brand), 1st bottle fill, different spark plugs, bit of dyno time for correct jetting.

On 7/17/2018 at 8:31 AM, WantGTR said:

it made 50% more power for $1400. cant beat that. Thats nitrous kit (NOS brand), 1st bottle fill, different spark plugs, bit of dyno time for correct jetting.

That intake manifold definitely won't double my power, that's for sure haha!

So $/kw NOS is still the winner.

However when the engine is finished I am hoping that this little N/A screamer will make your pee pee move ?

Hey guys, another update.

 

My Ross Performance Crank trigger + pulley has shown up!!

 

AFAIK this is the first one of their production ones to be sold ?

 

I'll let the pictures do the talking though.

 

ykk9cBAl.jpg

 

TZvVkeWl.jpg

 

KOdP95kl.jpg

 

C3LbCBal.jpg

 

JkSK9Z7l.jpg

 

Amx5euzl.jpg

 

y51uGXZl.jpg

 

08OqQV2l.jpg

 

 

  • Like 1
  • 1 month later...

Hey guys, have been a little light on updates the past couple of weeks. 

 

Although did another track day on the 12.8.18

 

A touch slower partially due to track temp being only 7°C at 2:30pm very cold day, and I had come down with the flu, (was still going to drive though!)

 

Anyway, as always, enjoy and be gentle ?

 

 

  • Like 1

I like that crank pulley, very nice. Any idea on where/how you are going to mount the sensor?

That was the problem for me, nowhere to mount it reliably. If my "homemade crank trigger" off the flywheel fails, i might copy what road you take

  • 1 month later...
  • 4 weeks later...
On 10/17/2018 at 1:09 AM, 180sxnit said:

Any more updates?

Heaps of updates mate!

I've been spending more time at the track than I have updating my build threads ?

 

I'll do another big update soon, thanks for asking :) 

  • Like 2
  • 2 months later...

Found this thread while searching for brake upgrade ideas and got hooked.
Love the progress you've made with the car thus far!


quick question though: 
Why did you use n16 hubs for the a32 discs and calipers? and which model n16 were these hubs sourced from?

  • 1 month later...
On 1/28/2019 at 11:14 PM, Keenan200Gxi said:

Found this thread while searching for brake upgrade ideas and got hooked.
Love the progress you've made with the car thus far!


quick question though: 
Why did you use n16 hubs for the a32 discs and calipers? and which model n16 were these hubs sourced from?

Hey mate, I haven't been on the forum much lately.

However, I'm back ;)

I used N16 hubs as the hole centers for the caliper carrier bracket are the same as A32 Maxima :)

Saves making a dogbone to mount the caliper.

  • Thanks 1

Alright guys, prepare yourselves for a big update session

A quick snap of how the car currently sits:

pnFjTYAl.jpg

WYJF1s2l.jpg

I scored myself a brand new genuine 90A alternator from a P12 SR20VE Primera :)

There is a reason for the want of extra amperage alternator in a later post ;)


Hm8pGsXl.jpg

KqVeIFil.jpg

3X7Pragl.jpg

A Pulsar Group of Aus member was making up these radiator panels, so I jumped on it, for the price of it, I couldn't even buy the material to make it!

TbeZrBil.jpg

CGXgxUQl.jpg

All painted up and refitted:

UluTEJyl.jpg

QwyupLHl.jpg

Started aquiring some parts for the P11 SR20VE again:

Water Pump blanking plate:

UC3XTcSl.jpg

I made a discovery a few years ago that the RWD GKTech water temp sender 'blocks' will suit a FWD setup if you cut off the extended leg

dnob36sl.jpg

XsLiHkjl.jpg
 

A Davis Craig EWP kit, doing away with the crank driven water pump (NA LIFE, lol)
 

JG4mb0ql.jpg

Since I'm removing the crank driven W/P I though I'd continue the theme and went for a Holden Astra P/S pump, the price was very good, hence buying 2 of them.

j0dm9oBl.jpg

Edited by TimmyMA70

A set of 16x7 +35 Buddyclub P1's came up for sale, and I just had to have them (track wheels)

zrtBUH5l.jpg

HCK49Uql.jpg

 

More part hoarding:
 

Oil filter block, removes the oil filter housing


WgTVOEol.jpg
 

zKM2fcSl.jpg

 

I have a couple of 32V (V for Viscous LSD) Gearboxes. The one in the car currently is out of a JN15 VZR, it has really short 1st - 3rd gear, 4.43:1 FD. Really fun behind a SR20DE, although the gearing behind a SR20VE isn't ideal, it has you dropping out of VVL.

This gearbox is out of a FN15 Autech, which uses a 4.4 FD although the same gearing as what out locally delivered N14/15 manuals, which is a nice spread.

The advantage of the 32V series is Cusco made a mechanical 1/1.5way LSD for them :)
Nismo did do a Mech LSD for the 32A (Aus delivered non LSD gearbox) however with the APRA series, they've all been snapped up and are NLA

This 32V is in dire need of a good clean-up:

BEFORE


0XvknlDl.jpg


AgoZMT4l.jpg


ig4hMfAl.jpg

AFTER
 

098fYEil.jpg

nvQt5nVl.jpg

DBF3Dtwl.jpg

Edited by TimmyMA70
  • Like 1

I've always loved the P12 SR20VE valve covers, however they are deceivingly 'deep'. Using the OEM oil filler cap just looks way too small.

This Nismo one popped up, it is ratchet too which I liked.

I'm probably going to paint it, although its a better option :)

PlTmFYal.jpg

fX0g6hPl.jpg

I made another discovery that early SR16VE used a water pump gasket. The later SR's have grooves in the sealing face to be able to just squeeze liquid gasket into. This is all well and good, however my water pump blanking plate is indeed just flat, no grooves for liquid gasket:

TEVq2AWl.jpg

 

WpODaNgl.jpg

 

Again with the parts hoarding...

P11 and P12 Xcessive Manufacturing Thermal intake gaskets

Why the P12 one you ask??

You shall see :)

SYh7YBcl.jpg

Edited by TimmyMA70

Okay, now to answer the P12 questions:

Confirmed 90,882kms from JP

She isn't pretty, although give me some time!

qHCG7U6l.jpg

JxCE9CRl.jpg

Test fitted the 4-1's

mMSxuxYl.jpg

Clearance is clearance ;)

pyWhgOvl.jpg

ya5bGBul.jpg

 

Then... Found that the head gasket was about to weep oil:

QUlrNAjl.jpg

Top end looks clean:

lsKzYI7l.jpg

Things escalated:

Anv3fZfl.jpg

YYnJfOrl.jpg

 

PlKff51l.jpg

 

5XtxL8Gl.jpg

KYBh4cJl.jpg

Started the clean-up:

wECKdRpl.jpg

  • Like 2

Continuation of 'let the cleaning begin'

OuSBs2Rl.jpg

BEFORE

Oil pump was stripped down, all machined surfaces were taped before being cleaned.

vnggblFl.jpg

AFTER

obVfDk3l.jpg

BEFORE

dLPtN8yl.jpg

AFTER

Tb4Vq5zl.jpg

Upper runners and Plenum:

BEFORE

VuJ5AEkl.jpg

AFTER

QbZQmrMl.jpg

Lower Runners

BEFORE

0CnOZhol.jpg


AFTER

8Kuv2U6l.jpg

Starting the reassembly

9gDKgtvl.jpg

6E87kvUl.jpg

TroWbWIl.jpg

Getting there now!!

IMksZlyl.jpg

Edited by TimmyMA70

Cleaned the carbon out of the ports on the head and the combustion chamber, also blued the valves and valve seat to check sealing before reassembly

iGCC9x0l.jpg

New valve stem seals and installation tool

SJl5UISl.jpg

Reassembled and ready to be bolted on

sthAP8ml.jpg

Head bolted down with new OEM P12 MLS head gasket, new headbolts and washers.

Lrn8dfXl.jpg

 

Rocker gear in!

jL5atekl.jpg

Cams in

rhk5ydsl.jpg

Checked Valve Clearance, pretty damn good really.

Although, I've put an order in to change a heap of the shims out to get spot on OEM valve clearance.

BqYe9RE.jpg?1

Onto the next project...

As you saw in earlier photos the Valve Cover was in dire need of some love.

Paint Stripped:

nDe68sx.jpg

P8Kr1Yk.jpg

Rubbed by hand to remove all corrosion:

 

5762dfn.jpg

 

eALSBkbl.jpg

NAes3uJl.jpg

rvKMy9Il.jpg

Masked, ready for painting:

 

hlf0Ofgl.jpg

 

DFDcq1bl.jpg

0sNAZUcl.jpg

W3UlYxbl.jpg

 

Paint time:

 

Uva60Orl.jpg

 

cu3Wragl.jpg

 

Bake time:

kQGjB9rl.jpg

 

 

 

Edited by TimmyMA70

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...