Jump to content
SAU Community

Recommended Posts

My turbo started to be laggy and unresponsive :(

Hey guys.

cut long story short. I've just had my car dynod 2 days ago and made an impressive 272kw at the wheels on 98. Car drove pretty well and was quick. Although I noticed when driving home on the M1 shortly after the dyno run, my car would be inconsistent with how the boost would come on. This was especially evident in 3rd gear as the intake would sound really loud but the car would not pull.

I didn't think too much of it, only until today my turbo started to feel really damn laggy. I would have to push the accelerator all the way to the floor for the turbo to kick in :( And I can't really hear the turbo spool like it usually does.

The last time I had this issue is when the turbo manifold bolts were loose. I had tightened the bolts and the car was transformed. The the boost came on hard and you could hear it spool nice and crisp. So I thought it would be a good idea to get a mechanic to add a metal gasket between the turbo manifold. 

Once I had the metal gasket installed the car never really felt the same and im not too sure why? Also the bolts were constantly coming loose no matter how many times I would try and tighten them down. Do you think this could be the underlying issue guys? 

I have a map sensor so would a boost leak still cause sever turbo lag?

Any help would be much appreciated.

 

When the gasket was replaced was the turbo looked at?

If you don't have lock tabs the nuts will want to undo always.

 

A Boost leak still causes issues even if you use a map sensor, it just means the fueling isn't thrown right off. I would definitely check the easy things first.

Boost leaks, dead turbo etc

17 minutes ago, Ben C34 said:

When the gasket was replaced was the turbo looked at?

If you don't have lock tabs the nuts will want to undo always.

 

A Boost leak still causes issues even if you use a map sensor, it just means the fueling isn't thrown right off. I would definitely check the easy things first.

Boost leaks, dead turbo etc

 

Thanks for the reply mate.

turbo is brand new and in good condition. I will be getting some lock tabs to see if it fixed the problem. Its driving me crazy!

1 hour ago, Trex said:

boost leak on a map would hunt idle, stutter/shudder under boost, and feel slow.

What ecu are you using? Do some logs and post them here

Hey mate

I'm using a link G4 ECU. My idle dips fairly low and almost stalls at times when I bip the throttle but I do have a forward facing plenum and big ass throttle body.

I had a look at my boost gauge today and I am starting to make positive boost pressure with my throttle all the way down to the floor and at about 4500rpm its at about 5 psi and will increase boost from there. Also my gauge is reading - 20 and its usually at - 18.

Usually I can get a nice vacuum and spool with not even quarter throttle and by 3500rpm im at 8psi. So something is definitely not right.

Its a new turbo so I doubt its blown? :( Ill see if I can post logs for you guys. I'm willing to send someone $50 from pay pal if anyone can solve this issue lol.

Edited by Redknight

I had my car tuned on a dyno once and 2 days later I had no boost and was very laggy. I took the cat off for a look and it was blocked up.

This could be your cause. Undo 2 bolts and shine the torch in there.

 

Update

Driving the car home from work this morning, I noticed my turbo was spooling normal again and had my power back. I parked the car to get something to eat for 10 minutes. Start the car up again and turbo goes back to being silent and can hardly hear it spool, feels like I have the handbreak up when Im boosting and extremely laggy. Also a strong fuel smell :(

Checked the exhaust and no signs of it being blocked. Exhaust place checked for any leaks with a stethoscope and couldn't hear any leaks. I have no idea what else to do :(

I am willing to pay anyone via paypal if someone can solve this issue. Its least I can do to get my baby driving like it should. I have spent so much damn money on this car and I expected it to be right :(

do you guys think its tuning related? I had it tuned at dare motorsport at Lismore NSW.

edit: The tuner added a 3 port solenoid to control boost. Would this cause any of the following issues if it was faulty? 

Edited by Redknight
  • Like 1

Reeks of fuel, faulty plug or coilpack?
Whens the last time you changed the plugs?
I had a coilpack fail and it was real laggy but you could tell something was wrong just low speed driving

Do you have a wideband? Is it possible someone has increased the fuel pressure and thrown the tune out (richer)

Thr fact that it smells fuely when it plays up would make me want to explore that further - too much fuel injection or not enough air getting into the engine

As above, i would take it to the tuner, especially if you dont have a wideband installed. Could take him 5mins to work it out

  • Like 2

UPDATE #3

Omg my exhaust sounds absolutely horrible today. It sounds really tingy or maybe slightly like a tractor? It just sounds terrible and nothing like an RB25. Also the fuel smell is so bad its stinging my eyes while I am driving. Boost lag is horrible and I can't even hear the turbo spool until I get to 5000rpm then it hits 17psi.

Would coil pack issue cause these issues? or maybe stuck wastegate? I have a brand new turbosmart actuator though..

The tuner did put in new spark plugs on the day of the tune. Also a bit dubious that he rejects my calls when I try to call him...

sorry for the late reply guys. I work crazy hours as a security officer. Will post logs as soon as I can. Appreciate everyone's help.

Edited by Redknight

Idle car. Disconnect coilpacks one at a time. See if when you pull one the car still sounds the same (no noticable change in engine note) and that might be your dead coil

Sent from my SM-G950F using SAU Community mobile app

  • Like 1

Anyone living in surfers paradise that is able to help for $100?

I have taken it to several mechanics and no one knows what the hell is wrong with it!

driving home last night I lost all power, strong fuel smell and the throttle is completely unresponsive. The injectors or engine are ticking really loud, almost like how a tractor idles. And turbo completely laggy. 

I took everyone suggestions and disconnected each coil but all I could notice is the engine revs dropped. I am not a mechanic so I have no idea what I am doing. All I know is I spent a huge amount of money to build my car so I can enjoy my pride and joy but its giving me nothing but frustration. I am really starting to hate the damn skylines.

I am desperate for someone to help me out and tell me exactly what the issue is so I can go fix it immediately. 

I am more than happy to pay someone just as much as a mechanic if it means diagnosing the issue. Any member from SAU that is living in gold coast?

I am at my wits end. 

 

Edited by Redknight

I fixed my car!!!!

I did a couple of things. My coolant temp sensor was all green and moldy from corrosion. I bought my self some contact cleaner and cleaned it. One of my injector plugs was not all the way in so I secured that. Also one of the wires on the 3 port was loose so I plugged that back in.

My exhaust started to sound beefier, more bass and I could actually hear my turbo spool! My mid range punch was back! 

 

Edited by Redknight

Well...the issue came back. I thought I had fixed it. 

No mechanic in gold coast can help me. I have no choice but to sell it and be done with skylines for good. I'm done with them.

Its going on car sales today.

appreciate the help guys. 

  • 3 weeks later...

Could be as simple as timing goes off.. Maybe it knocks and the timing gets retarded massively.. causing spooling noises but no performance.. I have seen that too many times than i can count.. take it back to the tuners. Could be a number of things. They'll find the issue 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...