Jump to content
SAU Community

Recommended Posts

Is it difficult/expensive to fix a lifter issue on an RB25 turbo engine?

Engine is still running.

Ie does it mean the Head is probably in question and Oil Cooler/Pressure.?

Full rebuild possibly?

 

I've never rebuilt an RB25, pretty keen to learn how to rebuild RB engines in general.

 

But to know when it's worth it or not is the question/knowledge i guess.

 

Cheers

Link to comment
https://www.sau.com.au/forums/topic/470708-rb25-turbo-lifter-repair-r33/
Share on other sites

Thanks!
And what if the issue was caused by oil pressure issue?
Any other things that need attention to detail?
eg oil cooler, oil pump, oil pressure stuff....

Guess it's hard to guess til it's opened up.[emoji849]

If you're saying that the engine suffered a loss of oil pressure, then your "turbo lifter repair" may actually be a repair instead of the usual "my lifters are noisy and sticky, how do I make them better" type question.  Running them at revs with not enough oil could damage them to the point where there is no repair, just replace.

I was looking at a car for sale seeing if it was worth the hassle to fix up.

Only info I was given:

Oil isn't milky

Car is still running but the guy insists it requires a tow away

And that the lifters require replacing.

Think it might require a reco engine or expensive.

 

Myself though Im really wanting the experience of trying to repair it myself under guidence from my mechanic. Shoulda just did an apprenticeship when I was younger i guess.

Ive worked on older simple cars like Gemini's etc so the RB25 is a huge jump.

 

Asking price is too high atm.

 

I sold my silver 97 40th anniversary rolling shell inc engine/tranny for $1800

The RB25 isn't that complicated, you should be fine if you have some sound mechanical knowledge under your belt as well as a mechanic to help out.

All you can do is throw the guy an offer with the price of a rebuild factored in and hope he has the sense to take it. He admitted it's a tow job after all.

  • Like 1

Compression and leakdown test, rust and paint, electrical faults. A ticking engine sound may, or may not be hydraulic lifters. The comp test will give you and idea of how much abuse she has likely seen, get her hot and see if she can keep her cool. Why does it need a tow..? cost analysis...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Middle seat good for a slab of beer or Esky for a road trip. 2x kids, means 1x free seat lol.
    • So we have most the interior back in, and for the first time with one OEM speaker hooked up. The 31 is running, driving and now tunes!!! Hahaha yet another step for the sub that sat 10m under for two weeks!!! unbelievable really 👌 lots of love work and not giving up on her. Seen so many youngsters part way less, and in way better condition. I’m stubborn, thinking another problem is just a hurdle to overcome, One at a time. IMG_9277.mov
    • That is correct. I'm using a modified ABS ring and a ZF speed sensor on my rear diff for speed input. I'm running a Haltech ecu. 
    • Been busy with the newborn. We originally thought we were going to go for a third, but we're good with two lol. He's starting to actually sleep now so I've had some energy to work on the car. It's been parked away in the garage since late November due to winter.  I went ahead and redid all my head oil drains. I originally had my front and rear head drain going into the same pipe but have since split them up. I also added an Ethanol content sensor to get ready to run E85 this summer. Tossed it on my return line. Sensor sits nicely under my intake manifold.    I also have a lot of parts that came in for my rear end. I'll be swapping over to a 3.3 final drive and doing the GK teck anti squat mod. While the rear subframe is off, I'll also change every bushing. We're planning on buying another house soon with the condition that I get at a minimum a 2 door garage, so I'll wait to have more room for this. Now onto the strange things that recently happened... After changing the lower rad hose (It had been sitting in my cabinet for well over a year and was the last hose I had to replace), I let the car idle in the garage to bleed my coolant. After running for a few minutes, it started missing. Got much worst within a minute or two and then stalled and would not restart. My crank sensor decided to crap itself. No damage, no explanation, just died. I went ahead and replaced it with another ZF sensor but the heavier duty stainless model with a shield. Tossed that in and started right up. Has anyone else seen this? I hate when things fail without cause. Luckily this was a blessing in disguise... This lead me to recheck my timing. It seems I may have had a beer or two the last time I had set my TDC angle as I was off exactly 5 degrees... I miscounted a line haha. I was running 5 degrees less then commanded. It's a little embarrassing but helps explain why my dyno operator seemed to think I should be making more then 478rwkws.        
    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
×
×
  • Create New...