Jump to content
SAU Community

S15 vs Evo 7-9 Track Car  

18 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

I see plenty of S chassis representation in my club.

Nah don't need reason, genuinely interested in pro's and con's of both. 

I see far more Evo's putting down fast lap times vs Evo's at the top end of town (WTAC etc) but we're only talking clubsprint and state level comp here. The allure of AWD is definitely appealing, but the simplicity and lower costs of an S15 are good too, plus I'm very comfortable with Nissan in general in terms of service/repair. 

I think I lean towards an Evo, as the ultimate goal is lap time, but then I think I want to stay Nissan because I've always been Nissan and look at cars like the Scorch Racing S15 as inspiration. I like the challenge of RWD, but I'm not really into sliding around all over the place (hate drifting) and prefer the idea of power down and go. GT-R was so fun to track because it has grip for days even on shit tyres. 
 

 

 

 

12 hours ago, junkie said:

They are brilliant - I'm actually thinking of buying one in the next 12 months, after driving a 275 RS Cup along the old pacific highway

Prices are low due to epic depreciation and the suspension setup has been done by people who know what they are doing, its pretty much perfect out of the box. Some of the later cars even run an exxy adjustable ohlins setup with composite springs and pilot sport cup 2 tyres

Yeah, looking through carsales, I was shocked at how cheap they are plus how rarely the owners drive them. 

I don't really know Evos all that well, but added cost would really only be labour as aftermarket prices are pretty similar. Only real extra complexity would be the diffs.
Stock ecu is tunable too.

Gearbox is a 3-4 hour job on the ground.

Would be quicker on a hoist.

Just had a look at prices on carsales.

Cheapest s15 in nsw is 17k
Cheapest evo 8 in nsw is 17.5k

So I think prices are comparable.

Other little things that factor in aswell.

S15 has small breaks
no oil cooler
Non bucket seats

These all add costs in the end

9 hours ago, ActionDan said:

Sounds like you're not brave enough to explore other brands/cars.

And buy a evo already.  

  • Like 4

I concur with Grant. Buy an evo and be done with it. It will yield the lap times. Why would you move from an s13 to an s15 anyway? It's pretty much the same thing, except a bit newer and heavier with a weaker gearbox. Also people wanting drug money for them. I bought an s15 with a forged rebuilt bottom end 4-5 years ago for 8k. I see worse condition cars than that for sale now for above 15. Yeah nah. I recently saw an evo 7 with fresh 2.2 stroker and lots of good bits on it for 22k. Looked the goods, was sold within a week. That would be an easy decision. The only reason to go s15 would be if you're a RWD purist and you love Nissan's.

 

 

  • Like 2

Lol equating brand differentiation with bravery is a new one lol.

Hatches look fugly as, personal preference. A Renault will have substantially less local support in terms of parts/knowledge and likely cost more to mod.

It seemingly offers no advantage over lots of other suggestions besides "bravery" and we don't mesure that at track days lol

Considering S15/14 due to my Nissan knowldge and affiliation (2x GTRs 1x Skyline and 1x Silvia). Parts availability and price. Plenty to choose from. Better suspension and chassis than my S13 which still needs 5 stud and a proper cage and is a tired older car with an original motor and box. Oh and RWD (less understeer issues apparently) and weight advantage over Evo.

I just need someone to throw me the keys to their Evo so I can go see what I think of it on the limit of grip.

See this is what I need, people who have driven both.

Yeah I don't see being able to order parts from the U.S. as being remotely similar to driving 10mins to one of the 3 Nissan Import dismantlers here and grabbing what I need.

An Evo would also be a step away from that. This here is Nissan country son.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...