Jump to content
SAU Community

Recommended Posts

R33 Track car Handling upgrades

hey all

im looking to get a set of coilovers and what not for my track car. grip car

What has been used and worked well?

Are white line sway bars worth the upgrade to?

tie rod ends worth it etc etc?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/471050-r33-track-car-handling-upgrades/
Share on other sites

BC ER coilovers & F&R Whiteline bars on ours - it works fairly well. MCA reds weren't available when we bought the BCs, but I've heard good things about them. Next suspension upgrade will be arms, to get some more camber & caster. 

What diff have you got - if it's the stock VLSD an upgrade may would be money well spent.

  • Like 2
5 hours ago, GeeDog said:

BC ER coilovers & F&R Whiteline bars on ours - it works fairly well. MCA reds weren't available when we bought the BCs, but I've heard good things about them. Next suspension upgrade will be arms, to get some more camber & caster. 

What diff have you got - if it's the stock VLSD an upgrade may would be money well spent.

i got same as geedog with the bc er coils and whiteline bars. I got camber arms, go for a good well known brand, i got a cheaper brand (ISC) and they were heaps harder to adjust

  • 1 year later...

Why don't you start with putting the right toe, camber and corner weight your car?

Make your own setup bars for cheap. The big boys in F1 still do it the same way.

that way you can build your own understanding of how mods you have put on have affected the handling. Every race car from excel's to super cars set toe, camber and corner weight before they hit the track.

 

In time you can move on to roll centres, adjusting the bump and rebound etc,  and gain a better understanding on how sway bars and the like affect the handling so you can tune it for different conditions and tracks.  

 

If you don't know how a larger diameter sway bar will affect your handling then do some research. you might find yourself making the handling worse.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...