Jump to content
SAU Community

Recommended Posts

R33 Gtst - AC noises every ~30 secs

Hello guys

When I turn the AC on, every ~30 seconds I can hear a sound from the outside, Im not sure how its exactly like, but Id describe it with "fizzle" combined with a short engine stuttering like you know it from broken coils.
Id also say, the intensity depends on the speed you drive; it doesnt seem to appear while standing with the and engines obviously running on the common 700/750 rpms

We recently did the whole timing belt change, could this have something to do with it?


Thanks a lot

Link to comment
https://www.sau.com.au/forums/topic/471185-r33-gtst-ac-noises-every-~30-secs/
Share on other sites

If its on the 'outside' then it can only really be the compressor or a leaking line. Perhaps something wrong with the A/C Fan on the condensor but doesn't sound consistant with what you have described.

Sounds like A/C Compressor if it changes with RPM. Could be an issue with a bearing of the clutch, or might be a belt issue also

Ok ok so what would be my next step? Tighten the belt wouldnt change a change would it? I was thinking about a leak too therefor I stopped in a bus lot, but I have not heard anything. 

Like said, not working without driving - I do believe its worst when 4th gear and about 3500rpms - its almost like an aftermarket bov man.... What could that cause other than a leak which it is obviously not the case

Hm, what I can say for sure, it only appears when I turn AC on; with the right rpms it comes straight with the button pressing and then like I described - every 25/30 secs.

I had the feeling, that it almost sounds like something pulling hard, but thats just one of those "maybe possibilities thoughts if the mainthought is wrong" ^^ And the main thinking is that air pop sound. 

I dont know exactly when it started, but we changed the whole timing belt stuff 3 weeks ago and everything was fine before - but would that have something to do with this issue?

^^ Like said, 3rd 4th gear hard to film and understand anything; we tried to get the sound but you mostly get wind screaming obviously; Ill give it another try in the weekend so you might check out for yourself

I have this issue as well....its like a small sneeze.  I have it on my Gtst AND my ford courier both.  Had both vehicles to the aircon specialist here and he laughed but after taking the courier for a drive came back scratching his head.  All gas pressures are fine, the condenser and all other parts are fine, everything tested perfect.  He said drive it till it fails

Well I have been driving both vehicles now for over 2 years and except for the sneeze...nothing...everything is working perfectly.

More worried for the courier cos its a single belt, but so far so good.

I am not sure if the engine stutters or not, I sometimes thing it does, and other times think it doesn't.  I think its got something to do with the condenser cutting in and out and loading the engine - as opposed to a misfire.

Well ye I could live with it IF it would be normal like everybody says - but as I mentioned it just came up after timing belt stuff and I dont wanna get used to something that is so obviously "wrong". I tried to record it but its hard cause of the wind or murphys law - everytime we try to record - nothing. Trying just to know - major sound ^^

 

Try this one pls, its one of the quieter appearances but you can hear it in the end.

its an opus file - just use VLC

 

2017-07-23-AUDIO-00007494 (1).opus

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah, fair enough. For the IAT, I'm using a legit GM sensor that was used on the car prior to my current build. I'll get another wideband and IAT ordered and follow up when they show up. Thanks for the help.
    • You shouldn't need to massively fatten up the mixtures for cold conditions. For one thing - 0°C is not that cold. For another, the Haltech will be using the IAT sensor to tell it how dense the air air, and calculate the correct amount of fuelling. Then the cold start enrichment is added as a % on top of that, so it should scale with the main fuelling. You might also doubt the IAT sensor at this time. You're not using one from an RB26 are you? Using a nice Bosch sensor or similar? Happens. Some wideband units take great pleasure in killing their sensors. Put another wideband in the tailpipe and compare. Or just swap the sensor to a brand new one and see.
    • Oh, my misunderstand. When the car was running, it sounded ok, but if I gave it any gas it wanted to die but caught itself afterwards. It's very different from how it was a couple months ago when it was warmer outside. The logs show that the AFRs are better during, what I assume, is warmup enrichment. Because it's cold, and air is more dense, should I work on the enrichment bit?
    • yess of course im not using 2nd hand parts from my spare engine, but the place where i live is hard to find parts for the RB20DET ,but for the RB20E is everywhere including new ones and a lot cheaper ,because for the RB20DET you have to order it overseas to get one and it cost a lot of money 3x the price to be exact. so i ask this topic because if i can use the new ones but for RB20E is it compatible or not. if not im screwed haha, not totally screwed but i have to save a lot of money first before i can begin repairing my engine, thanks for the information before.
    • Unless my sensor just died, was only a couple months old, I strongly believe it didn't. How can I test it? I never mentioned it being 20:1+?
×
×
  • Create New...