Jump to content
SAU Community

Brendons M35 build

Sack87

By Sack87,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Sack87 Community Regular

Sack87

Posted
Posted (edited)

Brendons M35 build

Thought I'd create a mini build thread on my progress with my first foray into Nissan wagon life and also a place to ask questions/path to follow.

I bought the car with f**ked coil packs so I picked it up cheap off some Indian guy. Put a new set of coil packs in and all was sweet for the next 6 months . . .

https://imageshack.com/i/pnV0vOWcj

https://imageshack.com/i/pltD8QHij

https://imageshack.com/i/popQVxMsj

I noticed an oil leak from the passenger side that was slowly getting worse and traced it back to the oil feed line. Ah well no biggy, just an easy fix or so I thought! Having not worked on a VQ before, it wasn't until later on I discovered you can't get the line off without pulling the whole turbo :down: Since the car wasn't far off 200k and the turbo had begun the Dyson whine song, I frantically searched for a new turbo. Scotty to the rescue with a Billet Intense he had spare that got to me in 4 days.

In the mean time while the car was off the road I set about fabbing up a 3" bellmouth dump pipe.

Then followed it up with a 3"-2.5" intake pipe. (Still need to weld on BOV return bung)

And this weekend just gone I fabbed up a 3" catless exhaust system to finish it all off. I picked up 7psi of boost without touching a thing, so it's stuck on 21psi with standard injectors and pump. I've hit up Christian to see if it's possible to run the car safely at this level on 98 with his flash tune, otherwise I will probably put a hi-flow cat in to drop the boost a little.

I've got a few other things in the works but all in due time!:10_wink:

 

11114143_1004586702936734_2084605032052754242_o.jpg

IMG_20170519_162848.jpg

IMG_20170519_162937.jpg

IMG_20170610_130957.jpg

IMG_20170610_131027.jpg

IMG_20170708_165626.jpg

Edited by Sack87
Pics not working
  • Like 8
Link to comment
Share on other sites
  • Replies 174
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Sack87
Sack87

Brendons M35 build Thought I'd create a mini build thread on my progress with my first foray into Nissan wagon life and also a place to ask questions/path to follow. I bought the car with f*

Sack87
Sack87

And you know everything I assume, including how to hack and tune a factory Ecu? Firstly I'm running a Billet Intense RS Turbo and secondly it's safe on 19psi as my AFR doesn't go above. 93v at WO

Sack87
Sack87

Pulled out the nav unit to make way for the EMU. Made up a bracket/fascia to house it and have two provisions for the option harnesses. I still need to wire in the LC2 and mount the unit but that can

Posted Images

Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Productive day trying out my my new pipe bender. Made up a rear subframe brace to help reduce some flex because the factory welds back there horrid. :2_grimacing:

I plan on making a few more of these up, so watch this space if you're interested in one:1311_thumbsup_tone2:

IMG_20170715_142553.jpg

IMG_20170715_144328.jpg

IMG_20170715_144335.jpg

  • Like 5
Link to comment
Share on other sites
West Grand Master

West

Posted
Posted
On 7/15/2017 at 5:29 PM, Sack87 said:

Productive day trying out my my new pipe bender. Made up a rear subframe brace to help reduce some flex because the factory welds back there horrid. :2_grimacing:

I plan on making a few more of these up, so watch this space if you're interested in one:1311_thumbsup_tone2:

IMG_20170715_142553.jpg

IMG_20170715_144328.jpg

IMG_20170715_144335.jpg

You can buy a brand new one from Nissan for around $100 but your looks solid and nice welding.

Link to comment
Share on other sites
  • 2 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Replaced the headlight globes last weekend with some LED Nighteye ones off eBay. 

Fixed the dodgy wiring job obviously done by the compliance shop and also fixed the issue with the passenger side globe constantly dropping out. The H1 globes earth through the clip into the light body but the clip had been bent and contact was poor. The LED globes have earth through the harness, so crimped on some plugs and walla! 

They just fit in behind the cover luckily and beam spread is awesome. High beams are like having spotlights fitted. 

 

IMG_20170726_133342.jpg

IMG_20170726_133355.jpg

IMG_20170726_133857.jpg

Link to comment
Share on other sites
  • 5 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Nuline EP159 Idler/Tensioner Pulley (this is for the alternator/PS and is wider than stock)

Gates 4PK950 V-Belt (this is 5mm too small so is a bit tight to get on)

Gates 6PK1170 V-Belt

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Made the mounts for the FMIC. They just touch the grill mounting tabs on the front bumper by about 3mm so I'll have to dremel a little bit off but it won't be noticeable. 

Also did the hot side piping and some of the cold side but forgot to grab a 3" 45 degree bend. I plan on making it 3" to the throttle body eventually as I need to run a 3" to 2.5" 45 degree reducer currently.

IMG_20171007_144514.jpg

IMG_20171007_144536.jpg

IMG_20171007_144824.jpg

  • Like 3
Link to comment
Share on other sites
  • 5 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Made up the rear subframe front brace to finish off the trio. I'll make a few more up as usual and will look into gearbox bracing next. 

Also got around to fabbing up the 3" IC piping that goes to the throttle body so it's full 3" from the FMIC. Just need to finish tidying up around where I silver soldered the nipples in and the BOV flange needs facing. 

IMG_20171105_174809.jpg

IMG_20171105_170206.jpg

IMG_20171105_170239.jpg

IMG_20171105_170404.jpg

  • Like 6
Link to comment
Share on other sites
  • 2 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

Finished off fitting the FMIC and wrapped the 3" throttle piping in heat reflective tape. 

Next on the list is to make up a few little brackets to relocate the sensor and solenoid and clean up the hosing. 

IMG_20171117_181353.jpg

  • Like 3
Link to comment
Share on other sites
  • 5 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted

The plastic under body engine guard was looking pretty poor so I decided to make a new one up out some ali sheet. I made up a template and cut out a simplified version of the factory one. But what do you do when you don't have a sheet metal bender?...

You make your own one; and it works f**king mint :happy: It's a heavy duty sucker that will do up to 3mm sheet and stores away nicely with removable handles. I still need to add some vertical supports to the angle that bolts down on the sheet and drill some holes to mount it to the bench instead of using clamps. 

DJ115d.jpg

sVm97I.jpg

DWNwWB.jpg

So with that side project made, I bent up the sheet and you end up with a nice shiny undertray.

EIeUMU.jpg

dkoyXZ.jpg

A7uw7Y.jpg

I'm also working on something else too as you can see but it's still in the "refinement" stage.:1311_thumbsup_tone2:

Z0EDc0.jpg

  • Like 3
Link to comment
Share on other sites
  • 2 weeks later...
  • 4 weeks later...
Sack87 Community Regular

Sack87

Posted
  • Author
Posted
On 29/12/2017 at 10:58 AM, jordanricketts3 said:
On 29/12/2017 at 10:56 AM, jordanricketts3 said:
Hey, any chance I can get the dimensions of that front bar? The length. I was considering doing the same type of thing to mine because of my fmic!

Just the length of the bar itself and how far in you did the bends

Sorry for taking so long to get back to you.

Bends are 130mm from the ends and total bar length is 690. Just make sure you slot the holes in the mounting plates otherwise it's a PITA to get on.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      2020 Nissan Skyline 400R V37/Infiniti Q50 RS insurance in NSW

      By sonicii · Posted

      As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • araiko
      Importing from the US into W.A - 15 yo old car

      By araiko · Posted

      loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • DraftySquash
      Question about R34 GTT A/T Solenoids

      By DraftySquash · Posted

      So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Kinkstaah
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By Kinkstaah · Posted

      Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • PranK
      R’s Meet - Fuji speedway 2024

      By PranK · Posted

      So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...