Jump to content
SAU Community

Recommended Posts

Helmet + Hans Packages

Been looking at Hans devices as I'm driving more aggressively, run a half cage, fixed back seat, and harness. I do use a little neck support donut, but after seeing crash test footage about how the head just moves forward while everything else stays put, a HANS makes a lot of sense. 

My current helmet is just a Sparx basic rthing, not HANS compatible so I'd need a new helmet and ebay is running various deals at the moment. 

This can be had for $850ish delivered. 

http://www.ebay.com.au/itm/131954318581?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

Anyone got experience with Racelid helmets or that particular HANS model? 

I'm also not sure which model in terms of degrees, I can measure this, but any advice on that front is appreciated. 

Link to comment
https://www.sau.com.au/forums/topic/471397-helmet-hans-packages/
Share on other sites

I've also been thinking that I should have a Hans device & helmet to suit, for the same reasons. I haven't done any research, but your post will prompt me to. I think I'd prefer an open face helmet for in the car - have been using my bike Shoei to date. I usually leave the visor off.

Having bought too many bike helmets in my lifetime, I do know that I need to try them on before committing - the same size in different brands fit differently. I can only assume that car helmets are the same.

I did buy some suspension bits from that Ebay seller last week, and had no issues - they were as described, packed well & arrived in a couple of days.

I have that model racelid minus the duck bill. Fairly decent. I found the visor lock tabs to be a bit poorly designed. Tinted/colour visor options are also limited. 

Definately go try them on though. I had a bit of trouble finding a comfortable car helmet before getting this. 

No experience with HANS though

Personally I wouldn't buy a helmet I couldn't try on. Proper fit matters for comfort and safety.  

I stuck with a basic bike helmet for years until the category required us to have HANS. I didn't want to move to one due to cost and an (incorrect) perception that it would be uncomfortable and restrictive.  Of course you also need a 4+ point harness, and make sure that the width of your HANS shoulders are the same width as your belts, they often are not.

  • Like 1

I have 4pt Velo harness, 72mm strap which is just under 3".

I'll check the Hans.

I'll ask the local kart and bike shops, my best guess isni could maybe try a Bell helmet.

I've got a young family and I'm driving harder now, making mistakes, sideways, offs etc so I just want that security.

Also either add on to or replace the cage, it's one of Brad's (ProFab) bolt in, welded half cage.

Yes and no.

YouTube the clip of the rally driver who puts his car into a ditch at low speed and almost knocks himself out (I will post tomorrow if you can't find it).

His nav had a Hans on, no issues for him/her.

You also hit the nail on the head. I would like to do either/and PI, EC/Bathurst either in the Silvia or the GTR.

As mentioned earlier, I have a family I'd like to come home to, and we're not talking big money in terms of "insurance".

Plus, have you seen how shitfully I drive :D

I spent double what you are looking to spend however im in open cockpit.
Just like with race suits the more you spend the better quality and more comfortable it gets.

Like Duncan said above, a helmet + suit are 2 things you just can't buy online... have to try on in person before paying for it as all brands/models/sizes are different.

All good points, I've seen enough cars end up in walls at my trackdays to be making this a priority.

Luckily Revolution Racegear have the same package for sale and there's one around the corner, hopefully it's in stock. Also thinking of going 6 point harness instead of the 4 point i currently have as tightening the shoulder straps hikes up the waist strap.

 

ah cool, they have the exact same kit for $879, much for muchness really, if they have it in store and fits well i'll support them. There's also a different closed faced for $829 and open faced option for $769

http://www.revolutionracegear.com.au/?PCID=10807&PSO=245&PSID=SPECIAL&PSV=Primary&CDO=

36 minutes ago, GTofuS-T said:

ah cool, they have the exact same kit for $879, much for muchness really, if they have it in store and fits well i'll support them. There's also a different closed faced for $829 and open faced option for $769

I have to drive past RRG in Adelaide this morning - I should get my arse in there and have a look. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Grind them off, drill them out. Repair any rust on the other side. Start again from scratch.
    • Big R34 GTR parts cleanout. I have a lot of stuff collected over the last 14 years and my missus is giving me hard time. Make my life easy.   Nismo GT carbon fibre diffuser fins (discontinued)  NEW  $2900 Garage Defend Stingray canards carbon fibre  NEW  $1300  Top Secret G Force carbon fibre front diffuser  NEW  $2000  Haltech Elite 2500  NEW  $2500  Haltech Platinum Pro R34 GTR   USED  $1400  Apex’I power FC D'jetro + hand controller R34 GTR   USED  $1400  Nissan OEM BNR34 ECU  USED   $1000  HKS EVC 6  USED  $600  Blitz dual SBC ID boost controller.  USED  $350  TRE 255 LPH Fuel pump  NEW  $100  Fujitsubo  Super Ti exhaust  USED  $2700  Tomei Expreme Ti exhaust  USED  $2000  Trust stainless steel front pipe  USED  $1000  Apex’I super suction kit  USED $400  BC BR coilovers  USED  $600  Hardrace front upper camber kit. USED  $300  Garret 2860-5 turbos –  one good, one needs reco USED  $1000  Nissan OEM Toshiba MFD Screen replacement  NEW  $450  Nissan OEM BNR34 Series II front passenger seat  USED (mint) $5000   Nissan OEM BNR34 front bar in TV2  USED  $1000  Nissan OEM BNR34 front lower air spoiler  USED  $900  Nissan OEM BNR34 front lower air spoiler (painted)  USED  $900  Nismo front indicator (clear) USED  $80 Nissan OEM BNR34 radiator  USED $500  Nissan OEM BNR34 turbos  USED  $500  Nissan OEM BNR34 intercooler USED  $800  Nissan OEM BNR34 front swaybar   USED  $500  Nissan OEM BNR34 intake pipes   USED  $400    Also have a square set of uber rare Volk CE28n in 19*10 +22. Not really keen to sell these but make a high enough offer and maybe I will. If you don't know how much these usually sell for don't bother.   PM for pics.  Pickup Chadstone VIC or postage at buyer's expense.
    • Thanks Mate, I did know you could do that but i know there is a pump out there that you can bolt on and it all lines up. I was told about it and then forgot the model, I figure if i am pulling it apart i will just put a new one on 
    • You can also remove the veins from the HICAS portion of your existing pump. 
    • Trying to swap the rear subframe on my R34 and can't remove the L-shaped stay brackets between the front subframe mounts and the sill/chassis. I'm in the UK so rust is a problem. I've used loads of WD40 and then Tunap 103 for days beforehand. I backed off the bolts forward a bit, backward a bit repeatedly for ages to try and avoid snapping. They have all moved a few full turns. The one I've spent most time on has come loose and I can turn with fingers, and it will pull down and push up 2-3mm. But it won't come out. I can tighten it back up and loosen it off again repeatedly but it still won't come out. I assumed there's a captive nut inside but if that's broken loose then I can't understand why I can always tighten the bolt back up - I'd expect it to just spin both ways. Any ideas what's happening here? I can't visualise what's inside there to cause this.
×
×
  • Create New...