Jump to content
SAU Community

Recommended Posts

Helmet + Hans Packages

Been looking at Hans devices as I'm driving more aggressively, run a half cage, fixed back seat, and harness. I do use a little neck support donut, but after seeing crash test footage about how the head just moves forward while everything else stays put, a HANS makes a lot of sense. 

My current helmet is just a Sparx basic rthing, not HANS compatible so I'd need a new helmet and ebay is running various deals at the moment. 

This can be had for $850ish delivered. 

http://www.ebay.com.au/itm/131954318581?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

Anyone got experience with Racelid helmets or that particular HANS model? 

I'm also not sure which model in terms of degrees, I can measure this, but any advice on that front is appreciated. 

Link to comment
https://www.sau.com.au/forums/topic/471397-helmet-hans-packages/
Share on other sites

I've also been thinking that I should have a Hans device & helmet to suit, for the same reasons. I haven't done any research, but your post will prompt me to. I think I'd prefer an open face helmet for in the car - have been using my bike Shoei to date. I usually leave the visor off.

Having bought too many bike helmets in my lifetime, I do know that I need to try them on before committing - the same size in different brands fit differently. I can only assume that car helmets are the same.

I did buy some suspension bits from that Ebay seller last week, and had no issues - they were as described, packed well & arrived in a couple of days.

I have that model racelid minus the duck bill. Fairly decent. I found the visor lock tabs to be a bit poorly designed. Tinted/colour visor options are also limited. 

Definately go try them on though. I had a bit of trouble finding a comfortable car helmet before getting this. 

No experience with HANS though

Personally I wouldn't buy a helmet I couldn't try on. Proper fit matters for comfort and safety.  

I stuck with a basic bike helmet for years until the category required us to have HANS. I didn't want to move to one due to cost and an (incorrect) perception that it would be uncomfortable and restrictive.  Of course you also need a 4+ point harness, and make sure that the width of your HANS shoulders are the same width as your belts, they often are not.

  • Like 1

I have 4pt Velo harness, 72mm strap which is just under 3".

I'll check the Hans.

I'll ask the local kart and bike shops, my best guess isni could maybe try a Bell helmet.

I've got a young family and I'm driving harder now, making mistakes, sideways, offs etc so I just want that security.

Also either add on to or replace the cage, it's one of Brad's (ProFab) bolt in, welded half cage.

Yes and no.

YouTube the clip of the rally driver who puts his car into a ditch at low speed and almost knocks himself out (I will post tomorrow if you can't find it).

His nav had a Hans on, no issues for him/her.

You also hit the nail on the head. I would like to do either/and PI, EC/Bathurst either in the Silvia or the GTR.

As mentioned earlier, I have a family I'd like to come home to, and we're not talking big money in terms of "insurance".

Plus, have you seen how shitfully I drive :D

I spent double what you are looking to spend however im in open cockpit.
Just like with race suits the more you spend the better quality and more comfortable it gets.

Like Duncan said above, a helmet + suit are 2 things you just can't buy online... have to try on in person before paying for it as all brands/models/sizes are different.

All good points, I've seen enough cars end up in walls at my trackdays to be making this a priority.

Luckily Revolution Racegear have the same package for sale and there's one around the corner, hopefully it's in stock. Also thinking of going 6 point harness instead of the 4 point i currently have as tightening the shoulder straps hikes up the waist strap.

 

ah cool, they have the exact same kit for $879, much for muchness really, if they have it in store and fits well i'll support them. There's also a different closed faced for $829 and open faced option for $769

http://www.revolutionracegear.com.au/?PCID=10807&PSO=245&PSID=SPECIAL&PSV=Primary&CDO=

36 minutes ago, GTofuS-T said:

ah cool, they have the exact same kit for $879, much for muchness really, if they have it in store and fits well i'll support them. There's also a different closed faced for $829 and open faced option for $769

I have to drive past RRG in Adelaide this morning - I should get my arse in there and have a look. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...