M35 rear sway bar query

[Stag-do]

M35 rear sway bar query

Hi all, I'm wanting to run dual exhaust on PNM35. Problem being the right side is hindered by the sway bar. 

I know a Y50 Fuga sway bar will fit and allow for dual pipes. I currently have a whiteline S/B installed and you all know the benefits of this. 

I don't think Fuga sway bar will afford the same benefits, so my query is will a Z34 rear sway bar fit our stags? (affordable aftermarket ones are available).

Cheers

 

[nickcorr]

The rear suspension of the Z33 350Z is the same as the M35 Stagea, the V35 Skylines, Y50 Fuga's and even E51 El Grands (plus the SUV versions)... The Y50 was available with dual exhausts, hence the swaybar fits the Stagea.

However the Z34 370Z rear suspension is the same as the V36 Skyline, Y51 Fuga (AUS Infiniti Q70), plus SUV models and so different to the M35 Stagea, and will not easily fit..

Looks like you need an uprated Y50 one to give you what you need... Might also need to move your carbon canister to fit the extra muffler in... Sure that Cam had to muck about with something like that when he installed his dual exhausts...

[Leroy Peterson]

I still need to find out if Y34/F50 is same as Z33/V35/M35... There's always small differences and wasn't sure how similar things were with M35 being AWD option.

 

In regards to dual exit exhaust, I'm planning my system to split between the diff and the spare wheel well. From memory it should clear the sway bar. (3" single to 2.25/2.5" twins)

 

 

[iamhe77]

Y50 is what you want. I have one on mine which allowed me to run V36 dual exhaust. Nick is correct, I had to move the carbon canister to allow for the muffler.

Of note, if you are looking to put a V36 exhaust in there, you will need to "massage" the driver side muffler to clear the spare wheel well.

Alternatively, you could always do a large single and then split it off after the sway bar to twin outlets.

[Stag-do]

Thanks for advice guys. Much appreciated!