R33 gtst wheel + tyre fitment

[RBtheworld]

R33 gtst wheel + tyre fitment

Hey guys 

got a set of 18x8.5 +15 square set of wheels 

wondering if anyone else has run this set up on there 33 gtst, what tyre size I might need or limitations etc. Is on coilovers with standard arms etc. 

 

thanks

[GTofuS-T]

You should find your answer in the above thread

[RBtheworld]

No lucky unfortunately  

 

thanks though

[vxsr33]

I'm running similiar; 17 x 9 +12 with rolled guards and around 2.5 degrees camber at all 4 corners. Sits flush with the guards and doesn't scrub or rub whatsoever even under full lock. Running 235 40 federal rsr's (more like a 245 or 255 profile as the rsr runs wider than the stated width). Planning on running 255's next tyre change.

You might have to roll your guards lightly to get those wheels to fit. You could run 255/35/18 tyres all round which will give you a good amount of grip, the correct rolling diameter, and will look pretty aggressive. Will definitely fit the rears not 100% sure if it will rub at the fronts, might have to trim off some of the bits that stick out on the plastic guard liners.

[vxsr33]

I'm running similiar; 17 x 9 +12 with rolled guards and around 2.5 degrees camber at all 4 corners. Sits flush with the guards and doesn't scrub or rub whatsoever even under full lock. Running 235 40 federal rsr's (more like a 245 or 255 profile as the rsr runs wider than the stated width). Planning on running 255's next tyre change.

You might have to roll your guards lightly to get those wheels to fit. You could run 255/35/18 tyres all round which will give you a good amount of grip, the correct rolling diameter, and will look pretty aggressive. Will definitely fit the rears not 100% sure if it will rub at the fronts, might have to trim off some of the bits that stick out on the plastic guard liners.