What injector sleeves & o rings do I use for the PNT PERFORMANCE JUN STYLE PLENUM and standard injectors for Rb25det neo

[adam wicks]

What injector sleeves & o rings do I use for the PNT PERFORMANCE JUN STYLE PLENUM to use standard injectors for Rb25det neo

 

Any help would be greatly appreciated

[Sub Boy32]

Have you measured the injector boss hole size? I'm not familiar with the Jun plenum but if it's made for the RB25 Neo it should be a standard 14/15mm seal. If it is made for a series one or series two RB25 they came out with a much larger sized seal for the side feed injectors. There are fuel rail kits from various brands (Race Works for eg) that come with adaptor collars to convert the manifold from side feed to top feed setup, just make sure you get one with the correct top seal size (can be 11m or 14mm normally)

 

[adam wicks]

  On 09/09/2017 at 9:17 PM, Sub Boy32 said:

Have you measured the injector boss hole size? I'm not familiar with the Jun plenum but if it's made for the RB25 Neo it should be a standard 14/15mm seal. If it is made for a series one or series two RB25 they came out with a much larger sized seal for the side feed injectors. There are fuel rail kits from various brands (Race Works for eg) that come with adaptor collars to convert the manifold from side feed to top feed setup, just make sure you get one with the correct top seal size (can be 11m or 14mm normally)
 

Okay thanks

[adam wicks]

Okay so I just finished installing the plenum in my 34 it's running mint not missing a beat but it has the check engine, traction control off and slip error codes on the dash but it runs and drives fine do they just need to be cleared with the next tune ? Is it a tuner thing it is my car having issues ??

[Ben C34]

You got the traction control throttle body installed?

[GTSBoy]

The codes will come back.  You need Nistune.  There are flags to set to ignore them.

[adam wicks]

  On 14/09/2017 at 10:45 AM, Ben C34 said:

You got the traction control throttle body installed?

Which sensor is that ?

[adam wicks]

  On 14/09/2017 at 12:32 PM, GTSBoy said:

The codes will come back.  You need Nistune.  There are flags to set to ignore them.

I have an apexi fc will that be able to clear them ?

[adam wicks]

  On 14/09/2017 at 10:45 AM, Ben C34 said:

You got the traction control throttle body installed?

Is it the sensor in the second throttle body ? If it is no it's not

[GTSBoy]

Ah.  It's an R34.  OK, so you have a traction control CU somewhere in the car that is not happy that you have removed the TCS throttle and TCS throttle position sensor.  I was thinking that the codes were coming from the ECU, but if you have a PFC then that will give no f**k.  But the TCS CU will.  You can't have TCS if you remove the throttle for it, so you might as well find the TCS CU and pull it out.

I suggested Nistune because when you transplant a Neo into an older car with the TCS CU and so on in the car, the ECU chucks a wobbly and puts the code up.  Nistune allows you to mask those codes.  But in your case, it's the other way around.

[adam wicks]

  On 14/09/2017 at 9:10 PM, GTSBoy said:

Ah.  It's an R34.  OK, so you have a traction control CU somewhere in the car that is not happy that you have removed the TCS throttle and TCS throttle position sensor.  I was thinking that the codes were coming from the ECU, but if you have a PFC then that will give no f**k.  But the TCS CU will.  You can't have TCS if you remove the throttle for it, so you might as well find the TCS CU and pull it out.

I suggested Nistune because when you transplant a Neo into an older car with the TCS CU and so on in the car, the ECU chucks a wobbly and puts the code up.  Nistune allows you to mask those codes.  But in your case, it's the other way around.

 

 

Okay thanks for the help you wouldn't know where the tcs cu is in an r34 gtt? I'll have a google also

 

[GTSBoy]

Nope.  Google will be your friend.  I've never cared where it is in cars other than mine and thankfully, mine never had one!

[adam wicks]

  On 16/09/2017 at 4:04 PM, GTSBoy said:

Nope.  Google will be your friend.  I've never cared where it is in cars other than mine and thankfully, mine never had one!

Okay no worries I've tried googling it but couldn't find anything

[GTSBoy]

Your google-fu is weak grasshopper.  3 seconds found a thread from 2014 that I posted in!

There's bound to be more.

[adam wicks]

Gave it a read didn't really help me out what I want to know is how do I get the error codes off to go away off the dash ?

[GTSBoy]

remove globes

[adam wicks]

Is there any other ways as id still like the warning if my engines got problems

[Ben C34]

Put traction control throttle back on.

 

[adam wicks]

  On 21/09/2017 at 7:57 AM, Ben C34 said:

Put traction control throttle back on.
 

Can't with a changed throttle body.

[Leroy Peterson]

  On 21/09/2017 at 8:52 AM, adam wicks said:

 Can't with a changed throttle body. 

 

Remove globes

Or.

Install original throttle body

Or.

Stare at always-on globe

 

Those are the options.