Jump to content
SAU Community

another V35 CVT story

bebetaz

By bebetaz,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

bebetaz Rookie

bebetaz

Posted
Posted (edited)

another V35 CVT story

Not sure if I should start my post by 'Hi' or 'Help'

Let's try Hi...

Hi every one, I have a 2003 v35 350GT8, not rolling at the minute. The transmission 'disengaged' while I was on the freeway and now just refuses to engage at all, forward or reverse. I do get a slight jerk when I try to press the accelerator, but that's about it.

 

I'm looking at 2 options, bite the bullet and get whatever I can get for it in the current state, or do a trans swap.

I guess my questions now would be:

- If I decide to sell it as is, what sort of price do you think I could hope for?

-If I go with the trans swap, what would be involved, how much would that cost and do you guys know anybody on the central coast NSW that could do this?

 

Thanks guys,

bebetaz

Edited by bebetaz
Link to comment
https://www.sau.com.au/forums/topic/471892-another-v35-cvt-story/
Share on other sites
HuxSkyGT350 Contributor

HuxSkyGT350

Posted
Posted

I dont have any info for you, but I will watch this topic as im in a similar position in the whole "is it worth doing a Trans Swap over just selling it". My only difference might be that Im so sicking-ly in love with my car still, so I would do anything I could affordably to keep it for a long long time. I could get a straight answer out of the few Auto shops I had contacted, so lets hope you get the info you need.

Cheers

 

CEF33Y Experienced

CEF33Y

Posted
Posted

I don't have much info either, but a mate (a few years ago now) bought a v35 with a shagged cvt gearbox and successfully installed a 5 speed auto out of a 350z.

But it wasnt without drama. He is an electrical engineer, and had a decent auto electrician helping out. Alot of effort, but ended up with a pretty good car for the money/time invested.

  • 2 weeks later...
Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

you could sell it... just for not much money.

these V35 GT-8's sound like a curse that just gets passed onto to the next unsuspecting victim.

I just had a quick look on Yahoo Auctions and no V35 or Y34 CVT's for sale (i have seen some on there before).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R32 GTR clutch master cylinder adapters

      By r32-25t · Posted

      There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Duncan
      R32 GTR clutch master cylinder adapters

      By Duncan · Posted

      Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
    • GTSBoy
      Alpha omega racing bracket

      By GTSBoy · Posted

      Yes, but no. You need to keep the mating surfaces bare (ie the flat faces where the caliper and upright pads touch the dogbone) and also the internal threads will remain bare (unless there are no internal threads - do they use nuts on all the bolts?). So you can slow down obvious external corrosion, but not all of it. Anodising would be required to provide decent protection to the alloy, but I'm not actually sure if you should anodise something that is all about the strength. Anodising does reduce strength significantly. Like, up to 50% on some alloys for high thickness coating.
×
×
  • Create New...