Jump to content
SAU Community

Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

Outline For Skyline cruise on Sunday the 26th of September

11:00am

Meet at Coomera BP/Macdonalds

11:30am

Depart for Hinze Dam

12:00pm

Arrive at Hinze damn

Good chance for people to get some pics, have a chat etc.

12:30pm

Depart hinze dam and head south on M1 to coolongatta, then take a swift left onto the Gold Coast Highway and head north. Will be turning off the Gold Coast highway at Pacific Fair onto Hooker blvd/Nerang Broadbeach rd. From here go straight through to highway and head north on M1. Take the Brisbane rd/Helensvale south exit and head down Brisbane rd and continue on to the Spit where we will wrap things up.

If anyone dosent like this route or has any other ideas feel free to comment and we will change some things around to keep everyone happy.

Hoping for a Massive turnout

sounds pretty good but if you wana go to the hasle of going up gold coast hwy then we might aswell follow it all the way to southport and then head to the spit via mirina mirage exit off gc hwy, it will save doing the big arse detor, also wen u say follow the m1 south to collangatta, were abouts in coolangatta are we gona trun the whole show around? we could exit at currumbin or something, head to the beach, lap past it and continue up the gc hwy, it will keeep us away from the coolangata cop hassles and traffic a bit.

just a few suggestions, otherwise im in and very excited about the setup, well done:)

GOR33, thanks for your input. My reason for the big arse detour is because ithought most people wouldnt want to go through surfers on a sunday arvo because of police. I myself much prefer the idea of going straight through on the Gold Coast Highway but was thinking about what others would probably prefer. As for your idea to go through Currumbin , well i think its an awesome idea, for both the reasons your mentioned. I just dont know Currumbin too well so i just kept with the Coolie idea. But anyway i think the Currumbin idea is a goer. Will make sure I change that when i post up the final route. Keep your ideas comming

Another area you might want to consider is the car park meeting area at BP Coomera for departure, we usually meet in one of the two southern area carparks at the BP not out the front of McDonalds especially on a Sunday morning, there usually just isn't the room.

2 cents

yeh no matter were we go on the coast were gona get split up,everyone should just be aware of each meeting point and things should go smoothly, i know id rather miss the arse end of the group then end up in the back of a fellow skyliner, remeber erins massive cruise, that domino effect thing along smith street was a bit scary:(

as for the currumbin thing, ill mark out the route im thinking of on a map and show ya ok, see what u think.

Rodney the main reason the domino effect happens is that for some reason people seem to think that they need to blend into the middle of the pack instead of joining on the end.

For safety reasons people, please forget about your Ego (i.e "I have to be at the front of the pack") and join on the end so that there are no accidents. We will all get there in the end.

Quite simple really :)

as far as lights/gettin split up goes the only thing i can think of is if this did happen the people at the front could just pull over, for example, if we got split up along hooker blvd/nerang broadbeach rd we could just pull into the carrara stadium carpark and regroup. No ones wants this to be stop start but if we did get majorly split up, which shouldnt happen but if it did that would prob be the way to go? keep the ideas commin, then we will use them all to finalise a route

And as far as metting at bp/maccas goes i didnt mean right out the front of maccas, all up with the maccas parks, the area where the trucks park, around the back, and bp parks, theres should be more than enough i rekon?

Hello lovers of forced induction. and peace out to mr. j_isnoll. i have been waiting to go on a good cruise for a while. i am definitely going to come along. it sounds like there is gonna be a decent turn out. i think the skipping of McthecopsarewaitingformeDonalds is a good idea. as far as getting split up i think that a good idea is that we stick to a channel on the UHF's so if someone does get lost they can just buzz on the radio. plan for a good day.

and if anyone is coming from the redlands area and is a bit faint on where there going or whatever we could meet before and cruise to the starting point(coomera i think) from somewhere in the local area.

ps. yeah that is meant to be j_insoll in the last post. my bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL.... fk...   there goes 25K to make 200kW
    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
×
×
  • Create New...