Jump to content
SAU Community

RB25Neo/30

RenderedUnsafe

By RenderedUnsafe,
in Engines & Forced Induction

 Share

Recommended Posts

RenderedUnsafe Apprentice

RenderedUnsafe

Posted
Posted
RB25Neo/30

A bit stuck, done a search but just confusing the f**k out of me. 

Got an RB25Neo/30 in my R32. Using the rb20 loom, got a coil conversion loom and rewired the injectors. 

When it comes to the ECU, what can I actually run? From what I have worked out there is a GTRLink that I can use as it's the same ecu plug. 

Found a Vipec V88 for a neo, that won't plug in though will it? How do I get around this as it's a good price.

 

cheers.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/
Share on other sites
The Mafia Grand Master

The Mafia

Posted
Posted

Hi mate

you only have 2 sort of easy choices here.

1. Remove the loom, and install a RB25 NEO loom to run with the Neo Vipec.
2. Get a GTRLink / Vipec. These fit all GTR models, and the R32 and R33 GTS-T. 

Any other way will only be a huge bitch.

You could get yourself a brand new wiring specialties Neo harness. Would cost about $1k but then you have a new loom. 

Personally, since later model Neos have fairly new looms in then, just grab a factory one of those nice and cheap

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849159
Share on other sites
RenderedUnsafe Apprentice

RenderedUnsafe

Posted
  • Author
Posted
1 hour ago, The Mafia said:

Hi mate

you only have 2 sort of easy choices here.

1. Remove the loom, and install a RB25 NEO loom to run with the Neo Vipec.
2. Get a GTRLink / Vipec. These fit all GTR models, and the R32 and R33 GTS-T. 

Any other way will only be a huge bitch.

You could get yourself a brand new wiring specialties Neo harness. Would cost about $1k but then you have a new loom. 

Personally, since later model Neos have fairly new looms in then, just grab a factory one of those nice and cheap

When you say get a GTRLink/Vipec which Vipec is this that will work?

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849175
Share on other sites
The Mafia Grand Master

The Mafia

Posted
Posted

Vipec and Link are the same thing / same hardware. Vipec is actually gone now, absorbed back into Link. 

Vipec "V" series = Link G4
Vipec "i" series = Link G4+

You want the model of vipec or link that fits the GTR. It also fits the RB20. (It's a one ECU fits all)

The GTRLink / GTRVipec fits everything except for the Neo as that has a different plug.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849180
Share on other sites
RenderedUnsafe Apprentice

RenderedUnsafe

Posted
  • Author
Posted
28 minutes ago, The Mafia said:

Vipec and Link are the same thing / same hardware. Vipec is actually gone now, absorbed back into Link. 

Vipec "V" series = Link G4
Vipec "i" series = Link G4+

You want the model of vipec or link that fits the GTR. It also fits the RB20. (It's a one ECU fits all)

The GTRLink / GTRVipec fits everything except for the Neo as that has a different plug.

Damn this one fits a neo, that's a no go.

 

Thanks heaps mate.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849182
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

There is no RB25 Nistune so if you have an RB20 Nistune that will work although it will not control your VCT.

If you get a Neo ecu and loom you can get a GTT  LinkECU to put inside the Neo case which would be ideal...it can control your VCT and with a solenoid better control boost.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849434
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
10 hours ago, Griffin said:

I have the same dilemma with a rb20de cefiro. It's auto and I want to keep it auto. Can I use a link rb26rb20 plugin? Do they have a built-in map sensor to do away with afm?

I don't know where the auto ecu is on your cefiro. If it is in the main engine ecu then no you will not be able to use the GTR Link. Why don't you get a wire in Link instead and yes you can use a map sensor with it.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849627
Share on other sites
Griffin Experienced

Griffin

Posted
Posted
47 minutes ago, KiwiRS4T said:

I don't know where the auto ecu is on your cefiro. If it is in the main engine ecu then no you will not be able to use the GTR Link. Why don't you get a wire in Link instead and yes you can use a map sensor with it.

Do you know how to find out? Will it be in the same location behind kick panel where main ecu is? 

I have an rb25 det manual loom and ECU, should I fit that and get a manual valve body for the auto to do away with the auto electrics? Then I could fit a plugin ECU . 

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7849638
Share on other sites
  • 3 weeks later...
Scott Black Rising Star

Scott Black

Posted
Posted

I'm running a 2530 neo in my r32 gts4, basically had to do a small amount of soldering for tps and idle valve and coil harness. Add in a wire for vct
Can use pretty much any plug in ecu for r33 r32 gtst or gtr. Some need an injector pin swaped around and if using GTr or 32 gtst ecu need a way to control vct, so rpm window switch or if using an r32 gtst nistune then use the feature pack and it let's you control it like stock
I use an adaptronic select on mine personally.

Link to comment
https://www.sau.com.au/forums/topic/471974-rb25neo30/#findComment-7852430
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      Alpha omega racing bracket

      By drifter17a · Posted

      Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • MBS206
      MLR's Bogan cruise ship

      By MBS206 · Posted

      January or Feb is it booked in for turbo fitment?
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • GTSBoy
      Alpha omega racing bracket

      By GTSBoy · Posted

      Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
    • drifter17a
      Alpha omega racing bracket

      By drifter17a · Posted

      appreciated it thanks   There are threads on the adaptor. I rear re anodising but didn’t know it will reduce strength   re mating services needing to be flat/ not painted, why would that be? I am devastated as car been off for a year, fixed power steering then installed bm57 master cylinder and just before driving it this came up. So annoyed   worried and afraid to drive it, no fun caliper coming off    
×
×
  • Create New...