Ecr33 Work wheel MD disk front fitment

[drpheel]

Ecr33 Work wheel MD disk front fitment

Does anyone have experience fitting a work MD disk wheel face with oem ecr33 calipers? I'm not sure if I will need a spacer to clear the caliper and I want to make sure I order the proper offset if I'm going to have to kick the wheel out a bit. 

[Leroy Peterson]

What model wheels is it for? spoke design is a bigger influence on caliper clearance than disk choice.

My guess, mid disk will be heaps of space for OEM R33 calipers.

[drpheel]

8 hours ago, Leroy Peterson said:

What model wheels is it for? spoke design is a bigger influence on caliper clearance than disk choice.

My guess, mid disk will be heaps of space for OEM R33 calipers.

Thanks for the reply Leroy! The wheel faces are Work VS-SS

[Leroy Peterson]

yeah that'll be fine, as long as the offset isnt something silly like in the negatives, should be ok.

[drpheel]

Im currently running 18x9.5+20 all around and like that look so wheels are same specs, only thing changing is the rear at 10.5in

 

Thanks for your input! Cant wait to get the wheels next week!! 

[drpheel]

For anyone searching this topic in the future you will need a 15mm spacer to clear the front caliper on a ecr33 with a Work Md disk 

[Leroy Peterson]

So 18x10.5 +20 doesn't clear the rear brakes? Is that what you're saying?

[niZmO_Man]

But Diiiisssssshhhhh

[drpheel]

18 hours ago, Leroy Peterson said:

So 18x10.5 +20 doesn't clear the rear brakes? Is that what you're saying?

Not sure where you're getting this conclusion form previous posts. All subjects and statements made are about the front caliper clearance. 

[Leroy Peterson]

On 9/20/2017 at 12:45 PM, drpheel said:

Im currently running 18x9.5+20 all around and like that look so wheels are same specs, only thing changing is the rear at 10.5in

you said you were running the same specs, but only changed the rear?

or have you gone from a 1pc wheel to 3pc in the same specs? any photos?

[drpheel]

Only thing changing on my new wheel setup was the rear is a little wider but thats not a issue. My main concern and reason i started the topic was for the front caliper clearance with the Work Md disk.

Yes,  I was going to a 3 peice wheel setup with the same specs in the front but I know some disk type dont clear big calipers. Shop I got them from estimated a 5 to 8 mm spacer but I wanted to check if someone had done it before so I knew exactly the spec of the spacer i needed. 

Ecr33 + work MD disk = need 15mm spacer in front

Case closed 

[Leroy Peterson]

Sorry to hear.
Ecr33 front calipers are just regular 4 pots. GTR sumitomo or brembo might be considered "big brake". High disk required then.