Jump to content
SAU Community

Recommended Posts

Modified r34 gtt part out

due to repair damage quote being a lot more then planned. i will be parting out my r34 gtt
car has all parts at the moment except front bumper passenger side skirt and passenger rear pod, both tail lights.
car is located in geelong and still drives on its own.
engine has 226,xxxkm all mods are less then 60k km runs fine no damage to anything mechanical just quater and end damage

quick mod list:
walbro 460lph fuel pump: $160
splitfire coilpacks: $300
tomei poncams type b: $600
bosch 100amp alternator: $120
ev14 725cc injectors: $500
 turbosmart hypergate 45mm external wastegate: $300
apexi avcr boost controller:  $400
plazmaman intercooler with cusom pipework (done by havoc fab will bolt onto standard pipework): $800
hypergear atr43ss2 turbo changed to V band external gate (2014 model and journal bearing ~50k km old): $900
nistune with flex fuel tune: $700
z32 afm: $150
full custom turbo back v band 3.5" stainless steal exhaust with magnaflow highflow cat (done by havoc fab) $1200
custom external wastegate off standard turbo manifold (done by havoc fab): $300
BC coilovers (no knocks or leaks): $800
npc 10" sprung button clutch: $500
hicas lockout bar: $70
work xd9 18x9 +30(front) 18x10 +38 (rear): $1400 (will no split set)
nismo clear indicators front and side: F: $100 S:$50
boost, oil temp, water temp gauges: $150 for lot
and all other parts avalible

buyer pays shipping on parts. pick up is fine also
first in first servered. no holds without deposit
will provide photos app on request. prices are negotiable.
happy to split parts (except wheels) or do deals on multiple parts. 
if parts are not stated as sold, they could still avalible please feel free to ask.

please message me on 0431394082 or reply here or pm. wont always be able to answer calls.


 

10404888_10205458853085772_7176397538981841118_n.jpg

10986930_10205458853725788_617916807617516459_n.jpg

11073400_10205431341638003_5093235743001205288_n.jpg

11232987_10206226370753234_2068878882568438886_n.jpg

12373376_10207210467355034_3220218803557256955_n.jpg

12705485_10207542072884965_5449384199185666417_n.jpg

13350513_10208430254368947_5448720572425969121_o.jpg

15589552_10210062920144571_8491232080019301309_n.jpg

20800357_10212196589964983_7807262142504128114_n.jpg

20800363_10212196589444970_8282606850089711775_n.jpg

20840767_10212196589604974_7157354125008182062_n.jpg

20841192_10212196590965008_7139658683959250217_n.jpg

20842236_10212196582284791_6669935866124334692_n.jpg

20882224_10212196590404994_4070135014533493425_n.jpg

20901604_10212196685527372_6336760540821617659_o.jpg

10401374_10203266272992640_7041613528776195768_n.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/472073-modified-r34-gtt-part-out/
Share on other sites

Oh, it's OK.  I'd only be interested in the diff if it was fully sick Nismo 1.5 way hella spec stuff anyway.  Hence my question about the subframe.  Because if I was going to change from my S15 helical, then I'd need driveshafts.  And if I need driveshafts, then I could use his.  And if I get all that, then he might as well put the whole rear end on a pallet and send it to me and I'll transplant yet another rear subframe into my car and get improved late model geometry (which I should have done using an S14 subframe instead of a Cefiro one!!!farken!).  After all, it's only money.  And then if I have R34 rear brakes I might as well put R34 fronts on as well.

See how it all snowballs out of control?

:D

 

standard gtt brakes. the whole rear sub and drive line is still in tact, as for diff im hoping to have it out today or tomorrow around work :) will get back to yous

took an ass raping by a grass bank... bloody vic roads and their horrible pothole written uneven roads -.-

ive had a lot of interest for selling the car as is, for those who maybe interested. the car is NOT a statutory write off, it is still able to be rego'ed (after repairs). i just dont have the money to repair the damaged myself. 

21463295_10212443586819750_8679104054368204507_n.jpg

21617705_10212443587019755_5067833108186518558_n.jpg

21686469_10212443587179759_2701287181328147971_n.jpg

21751936_10212443586699747_569217650050792191_n.jpg

21688053_10212443634100932_1890292623427950785_o.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are certain tasks, like replacing head gaskets, where it is very much best to already know what you are doing, and if you are not already an expert, then the next best thing is to have an expert around to help it get done. Little annoying checks and steps that are easy to forget or not interpret the results of properly, etc etc. It is hard to convey that to someone as a lesson prior to taking on a job, because there can be a whole list of "if you see this then it means that", or "if this is what you find then you will need to do these other 4 steps first". All the little bits of knowledge around sealant choice (ie, sealant at all? or no sealant? sealant only in certain parts of the gasket? sealant for this type of gasket but not that type of gasket? etc etc) cleanliness checks and methods, surface straightness and finish checks and methods, etc etc, all combine to mean that people who have done many of the same type of job will struggle less to get a good result than someone who hasn't done it before. I've been around this stuff since forever. But I will still consult with my expert(s) before taking on the big stuff with higher risk profile.
    • Well if I end up having to do the head gasket I will certainly find the necessary tools and instructions before beginning... Let's hope it won't come around.   Definitely. Depends on the job but I think "if you want it done right, do it yourself" applies almost every time
    • Can you at least move to a location without so many ladders, black cats and mirrors precariously propped up ready to be knocked down? Or buy yourself a 1 ton bulker bag of salt to drag around with you. Just, you know, sling it over your shoulder?
    • Meh, what's the worst that can happen? If is is supposed to have a washer, and: the spring retainer seals reasonably well on the surface, maybe just allowing a little bleed of oil out, and the spring does not coil bind when compressed that little extra bit, then the end result will be slightly higher relief pressure setpoint, and no other noticeable effects.
    • Weirdly I see a flat washer on aftermarket pumps but as you said it doesn't seem like new OEM pumps have it. EPC doesn't break out the regulator as a separate component either. I'm guessing if the pump came that way it's safe to use as-is. 
×
×
  • Create New...