Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Got the new trailer last week, worth every cent. Car can be loaded without removing the front bar and airing out the air bag is cool. Now just need to upgrade the tow car. 

IMG_20191118_143207.thumb.jpg.467d5a1ab463ba9c0774e7df93550984.jpg

Swapped the 4.36 ratio diff into the race car so can now put the gtr diff back in the sil80. 

IMG_20191123_124025.thumb.jpg.d11c1228251acdf8a8eca5a7b699f5fa.jpg

Top shafts are gtr, bottom standard gtst. Might drain the 98 and start E85  tune on the race car. 

  • Like 1
  • 1 month later...

Got stuck into the HQ last week and fitted up the msd unit and dizzy. Should have done this year's ago has made the car enjoyable. Will fit extractors and twin 2.5 exhaust when I get back from next shift at work and start tuning the carb so it's not so rich. 

IMG_20191217_161540.thumb.jpg.72275eae36082af50e46538e6ae3c373.jpg

IMG_20191217_161613.thumb.jpg.3cc350ecc29c530ba1b298ae83607efa.jpg

And started new job in Brisbane. Finally got to do a back to back Dyno of standard plenum VS short runner intake on a standardish Rb25 (kinagowa td06, e85, 25psi, greddy fmic, 3 inch exhaust, link g4 plugin) big hit to mid range power. IMG_20191210_110548.thumb.jpg.0992b12b5b24dc9dfd1ed6f4e5c3daad.jpg

  • Like 1

Nitrous almost all setup on the HQ

Image may contain: people sitting

Race car now lives in Brisbane, been drifting the 180sx heaps. Bent steering stuff last week so need new lca & tie rod at minimum and new mirror & door handle after clipping a barrier.
1175250488_IMG_20200118_1056401.thumb.jpg.2e90ca91dce832ab39093a37c48cc96a.jpg

Sil80 hasn't been touched

  • Like 2
  • 3 weeks later...

A late night update 

HQ got 4 into 1 extractors and twin 2.5 inch exhaust, finding someone to fill nitrous bottle is turning out to be difficult. 

IMG_20200206_172900.thumb.jpg.75a545555b8520c409edb6b8a3b566a5.jpg

 

Went to Airlie Beach, rented airbnb 

IMG_20200207_184326.thumb.jpg.3ff8bcd82863eaffe64d9d32c91359a7.jpg

Finally changed oil on drift car. Went to archerfield and had a great time, cars a little worse off but driving has improved 

IMG_20200216_095616.thumb.jpg.a2953b094f8b3256b167dff9cfd84eec.jpg

IMG_20200216_121013.thumb.jpg.abef62352d51737f65273c5e2b1a2cca.jpg

IMG_20200216_130905.thumb.jpg.972f345ceec0ac4348010ab2506e7df6.jpg

Actually made small progress on the sil80 and started stripping brake calipers for powder coating and new seals 

  • Like 1

Nice. 

Wouldn't a local BOC or SupaGas fill it for you? If not then find the local performance workshop/engine reconditioners and see if they know? 

Any clips of you banging in to shit you dirty drifter? 

BOC don't do nos system, just the industrial stuff and the one that does only does it a week before a big drag meet in Cairns or Mackay, should have just LS it. 

Got some in car stuff, will go through it when I get home as still in Brisbane for work. 

  • 1 month later...

Drove QR Autumn Matsuri last weekend. Heaps of fun and driving with mates that made the trip from Townsville.

87715630_137210494451420_7867413834594516992_o.thumb.jpg.e02d2bfa46440bdc5ad398b2f6c65e37.jpg

IMG_20200309_165023.jpg.1e6384c7fe4ada4eccbfd80f5106de62.jpg87263200_2722848831281005_4335733703939457024_o.jpg.80d71864f8b37cad102aaf751106dec7.jpg

 

Blew a welsh plug out of the block Saturday night IMG_20200308_073705.thumb.jpg.1b26c81e57704497f1839dab50768b5c.jpg

Got a new one and got it in and drove until the last 1.5hrs when 3rd gear decided to finally explode. Got a video from in car that I need to edit. 

IMG_20200318_104315.thumb.jpg.f91b6393ac637efb7a658a9fc7c3d617.jpg

Did post event comp test and tested 150-155psi, tested cooling system too and all good. New s14 gearbox was sourced and inspected before install, all new filters and fluids all ready for Thursday night at Archerfield drift. Definitely need to go e85 as extra 20kw would help on the big tracks. Once I get home hopefully do a few more steering mods and fix a few chassis problems. 

  • Like 2
22 minutes ago, Dose Pipe Sutututu said:

Boom boom with the box!

How did the pads go? 

They go pretty good but bloody noisy. Haven't done any really big stops(over 160kph) yet. Will go the performance street ones next. 

10 hours ago, robbo_rb180 said:

They go pretty good but bloody noisy. Haven't done any really big stops(over 160kph) yet. Will go the performance street ones next. 

You'll get sparks too with big stops ?

  • Like 1
Just now, ActionDan said:

Is the video cool?

Happy you're out driving, makes me miss it, in the meantime I cut wood and build sheds (and ruin my elbows!).

 

Video added. 

Need to find something simple to get out there and have fun in- 350z/v35 would be my pick atm

How big the new shed? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to come I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...