Jump to content
SAU Community

Recommended Posts

Just got offered R200 diff,i know that its 4.08 ratio diff,it came from S14,but seller cant tell what brand is that 2 way LSD,anybody can tell what brand it is?by Google it looks close to Nismo,but not sure,thats all the pictures i got:

 

18765438_10203129929406519_935524853_o.jpg

22117633_10203656511530743_147047719_o.jpg

22139973_10203656511570744_792137918_o.jpg

22140025_10203656511490742_1822391583_o.jpg

Link to comment
https://www.sau.com.au/forums/topic/472199-help-identify-r200-lsd-brand/
Share on other sites

The markings on the crownwheel make no difference because they are Nissan parts regardless of the origin of the diff centre.

The fully machined surface on the pumpkin does indeed make it look like Nismo.  Beyond that, it's going to be too hard to be 100% sure.  There may just be another brand that is machined like that, not that I know of any.

after more searching,i found this https://my350z.com/forum/engine-drivetrain-and-forced-induction-diy/412098-nismo-diff-home-install-pics.html

and it looks realy same,as for a lot of googling,only Nismo ones have like fabric welding on the end of lsd,where you see such dark line,othe machined ones are shiny all the way,like Kaaz

If its exactly the one,then its very good for me,cause i even want to make it 1.5 with medium lock

  • 2 weeks later...

bought it and took it apart,so thats what we have

its defo Nismo lsd,it was set to 2 way,so i will change it to 1.5 way

just one difference,no lock adjustment bolt as in topic that i have shared before

 

 

20171011_183255.jpg

20171011_183235.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...