Jump to content
SAU Community

Recommended Posts

Hi

Was checkin out a S1 R33 gtr and can't seem to figure out what was wrong with the turbo.

On acceleration it's making like some of all I can describe as a farting noise.

Definitely isn't working properly.

Definitely not boosting as the last car I viewed.

Just wanted to know is that am expensive fix if stuffed?

OR

Anyone got any videos of a blown turbo or anything that sounds vaguely familiar.?

Trying to figure out the root of the problem.

 

Link to comment
https://www.sau.com.au/forums/topic/472360-r33-s1-gtr-turbo-issue/
Share on other sites

Could be air leak like intercooler piping clamps?

What colour is the smoke from the exhaust?

If turbos are stuffed, it could be as cheap as replacement pair of turbos to full engine rebuild assuming it's stock ceramic wheels in these turbos. 

No smoke but i was a passenger so didnt checkout the rear whilst we were driving...

Wasnt blowing smoke before we left but did have a whirly noise thing also going on.

Just sounded like a balloon deflating each time it accellerated into 2nd, 3rd etc engaging the turbo.

Car was stock.

 

Clunky clutch too...bearing gone i think.

Steering wheel had weird ass noises behind the airbag bit too, noisy.

 

Just lacked power/torque unlike the car i saw last week...

 

Overall very average.

 

Then I betcha it's the intercooler piping clamp that doesn't want to clamp.

Judging by what else you've found on the car, walk away from that unless you wanna either play mechanics or park it at a workshop getting these issues fixed.

Yeah I'm not a mechanic but I reckon a full rebuild is on hand if its original 139,000kms+.

Even the injectors were that brittle bits had broken off before we even inspected it.

So didn't bother with a compression test.

 

That was just the start of the list.

Timing belt, power steering pump, clutch bearing, rotors, front diff seal leaking, radiator hoses collapsing, exhaust leak but it was the turbo noise and clutch/steering noises that counted me out.

Shame cause it had a good rust free body.

Just needed a lotta love by a mechanic and/ new engine/turbos.

 

Im finding its either one or the other...good body/bad engine or bad body / good engine..[emoji23]

All good.

Happy to wait for a suitable car to come up for sale. Not in any rush to buy.

I got my LP2 S2 coupe to have fun in so not too worried.

 

Im learning alot as I look.

 

I had to walk away cause $32k just wasnt anywhere near where i am at for this car.

The person selling it wasn't dodgy at all just selling with the only knowledge he knew about the car. Hence my reason for a check.

 

 

If you can get the car for sensible price (i.e. factoring in $10-15k rebuild), grab it providing it's in fantastic condition. Easier to move it on if something bad comes up in your life or some sort. 

Mechanicals are cheaper than bodywork. 

If it means anything to you my rb25 s1 stock turbo blew up a few months back. Farty whoosy noise is exactly the words i used to describe it. So yea at least 1 is probably blown.

 

On a related note, I could have bought a R33 GTR for 14k about 5 years ago good condition not fantastic but good. f**k me they have gone up in value. It was white and I dont like like white so I left it. I regret it now would have been worth 35-40k. Unbelievable looks like I will never buy a GTR now unless i get crazy rich from a miracle.

 

Even r32 gtst are going for 15k now. lol wut they used to be 4-5k 6 years ago.

  • Like 1
If it means anything to you my rb25 s1 stock turbo blew up a few months back. Farty whoosy noise is exactly the words i used to describe it. So yea at least 1 is probably blown.
 
On a related note, I could have bought a R33 GTR for 14k about 5 years ago good condition not fantastic but good. f**k me they have gone up in value. It was white and I dont like like white so I left it. I regret it now would have been worth 35-40k. Unbelievable looks like I will never buy a GTR now unless i get crazy rich from a miracle.
 
Even r32 gtst are going for 15k now. lol wut they used to be 4-5k 6 years ago.


Thanks for the turbo information! I guessed one was stuffed.

I'm just not interested in rusty cars or car's that require over $15k worth of work.
I'll probably just save more and import my own eventually.
On 10/15/2017 at 7:18 PM, mercyseat said:

Yeah I'm not a mechanic but I reckon a full rebuild is on hand if its original 139,000kms+.

Even the injectors were that brittle bits had broken off before we even inspected it.

So didn't bother with a compression test.

 

That was just the start of the list.

Timing belt, power steering pump, clutch bearing, rotors, front diff seal leaking, radiator hoses collapsing, exhaust leak but it was the turbo noise and clutch/steering noises that counted me out.

Shame cause it had a good rust free body.

Just needed a lotta love by a mechanic and/ new engine/turbos.

 

Im finding its either one or the other...good body/bad engine or bad body / good engine..emoji23.png

All good.

Happy to wait for a suitable car to come up for sale. Not in any rush to buy.

I got my LP2 S2 coupe to have fun in so not too worried.

 

Im learning alot as I look.

 

I had to walk away cause $32k just wasnt anywhere near where i am at for this car.

The person selling it wasn't dodgy at all just selling with the only knowledge he knew about the car. Hence my reason for a check.

 

 

Eek...where there's smoke there's fire! Some cars are just full of surprises and it's often a reflection of overall neglect somewhere in its life. Hard to tell dodgy sellers from the ignorant. So many times I've had a seller adamant that their car is perfect, then quizzed them on certain noises and the response comes back "oh it's been like that since I've owned it" or "I didn't notice that". My logic is, if they weren't aware of that...then what else haven't they noticed?

My first clue in a car's overall condition is the interior. Interiors are the first to show wear when a car has been neglected. Also a reflection of the seller's personality - if they don't care about where they are sitting, there's a good chance the rest of the car gets the same treatment!

  • Like 1

Well I was thinking of putting in a lower offer knowing the car probably needs a new engine & gearbox. But not sure what's the price of a S1 GTR shell in that condition?
Cause the body was rust-free from what I could see.
But there's a few other car's I've seen, so just taking my time.

Like I mentioned the guy didn't really know the full history of the car on this occasion and was a nice guy not dodgy.
Just hate seeing car's so neglected [emoji849]

Problem is, if the engine is knackered what about the rest - diff, suspension, bushes, steering, electricals. I guess these cars are at an age now where they all come with risks. Bargains can be had by doing work others can't be bothered. I bought my 33R with a heavy bottom end knock but it was damn cheap.

I've also bought things off dodgy sellers before too, knowing they were dodgy. Just need to know more than them to get the bargain out of it. Like the guy who sold me a monoblock amp for cheap saying it worked fine. Wasn't working when I got it home, but a 10 cent fuse replacement fixed that lol. Probably thought it was toast and wanted to make it someone else's problem for cheap.

  • Like 1

My mate came to see the car. Definitely blown turbo, clutch gone, and a heap of what iffs going on as well so walked away cause the guy still wanted too much for it as is.

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...