Jump to content
SAU Community

Recommended Posts

Got to clean out the garage

R33 GTR main gauges speedo tacho etc has 25,000klm on clock $200

R33 three centre gauges #SOLD#

R33 GTR fuel pump $220

R33 GTR injectors $280

R33 GTR AFM x2 #SOLD#

R33 standard intercooler pipes $80

HKS AFM pipes from AFM to air filter pod #SOLD#

R33 GTR clutch kit from unique autosports 40% increase in clamping pressure bronze cerametallic clutch plate done approx 3500klms new $850 sell for $150 ( check unique autosports webpage)

R33 GTR stock cam gears x2 $50 for both

R33 stock fuel regulator $20

make an offer you never know!

the three centre gauge consists off front torque,oil temp and a boost gauge

the clutch is a pull type ,i think 33gts is push so you might need some sort of kit to change it over to a push type setup other than that iam not sure.

I dont think so as the gtr injector is low impedence top feed where as a rb25 is side feed high impedence you would have to change your fuel rail . I think they are better suited to upgrade for the rb20 in the R32 gts.

CroatianDlite yes they are both for a R33 GTR they are the stock guages $280 for both plus postage

Blitz_R33 the clutch was only used for about 3 to 4000 klms over about 6 months it was taken out and replaced with a twin plate when i upgraded my turbos, unique autosports claim it can hold onto 300kw atw i never pushed it that hard only dropped the clutch 3 times running mid 12's and it never slipped, i would say it would have at an uneducated guess closer to 60 to 70% left in the plate iam not really sure and iam certian unique autosports could supply a new clutch plate if needed this is why i have it at this price

CroatianDlite yes they are both for a R33 GTR they are the stock guages $280 for both plus postage

Blitz_R33  the clutch was only used for about 3 to 4000 klms over about 6 months it was taken out and replaced with a twin plate when i upgraded my turbos, unique autosports claim it can hold onto 300kw atw i never pushed it that hard only dropped the clutch 3 times running mid 12's and it never slipped, i would say it would have at an uneducated guess closer to 60 to 70% left in the plate iam not really sure and iam certian unique autosports could supply a new clutch plate if needed this is why i have it at this price

Interested in the 33GTR centre gauges. Do you know (or does anyone else know) if these will plug into an R32 GTR?

Thanks,

Richard

OK

mmmgtir i wouldn't know i dont think R32's have the front torque meter on them do they?

Blitz_R33 postage looks to be about $25 from Townsville to Brisbane the weight is around 20kg

Stirlo_GTR Sorry the pipes have been sold

  • 2 weeks later...
OK    

mmmgtir i wouldn't know i dont think R32's have the front torque meter on them do they?

Blitz_R33 postage looks to be about $25 from Townsville to Brisbane the weight  is around 20kg

Stirlo_GTR Sorry the pipes have been sold

Yeah they do, they have the same three gauges, only difference is that the R33 ones are angled slightly, I'm just wondering if the plug etc is the same?

Richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That would be interested if it's the case as seems like it would make the job a lot messier but subaru sells OEM gaskets so seems it might of had it.
    • Fuel tank is out. Looks pretty bloody good under (ie above) the fuel tank.  Amazing how good the factory e-coat holds up in the hidden areas.  No where near as much body deadener to get rid of as the front but still not looking forward to it!  Shit of a job.  I'm thinking I might grab a needle scaler and give that a go before I attack it with the angle grinder and wire wheel which is how I did the front 2/3's of the car.  Feels good to be working on the car again but who knows how long it will last!  Hopefully I can get it further forward than where it was prior to this last block of work when I decided to go back 10 steps further down the rabbit hole from where i already was! The problem is, I'm realising how hard it will be to repair and paint the bumpers, which cannot be put back on the car, and have a good paint match. There are also areas where it would be VERY hard to hide the new paint where it transitions from old paint. Like this- There is only one way to do that perfectly and I really dont want to have to do what that means I would have to do... 🤦‍♂️
    • Pretty sure the factory assembly doesn't have any gasket at all, just RTV.
    • I will get a couple cans for sure thanks, I do have 2lt fish oil to spray around the car already.
    • Thought I’d post pics of the packages for those interested. The premium package is #16. Remote start, security with tilt sensor and remote and backup battery, auto fold mirrors and door illumination.    Can post up pics of all the factory options and images from the factory options brochure if people are interested. I have all the dealer books etc for all rv37 models. 
×
×
  • Create New...