Jump to content
SAU Community

Recommended Posts

Hi guys,

Selling parts of my GT3076 setup that was on my RB25. Basically turns an internally gated GT3076 into external gate, to use with standard intake manifold etc.

This allows much better boost control and allowed mine to make more boost down low, in circumstances where the factory Garret IW wasn't holding shut.

Includes:

- RB25DET factory cast manifold

- Steel spacer to fit GT30 sized turbo

- Genuine Garrett GT3076 .82 rear housing (5 bolt outlet flange, T3 inlet) with external wastegate flange professionally welded on (to suit Turbosmart HyperGate 45) Internal gate welded shut.

- Dump pipe to suit 5 bolt turbo flange with external gate plumbed back in (including flex join)

- Modified 'J' pipe with relocated AAC pipe & GFB Respons BOV (recirculate or vent to atmo)

- Modified OEM heat shield

- Modified OEM hotside intercooler pipe (to accommodate 2" 90* bend from comp outlet)

- Steel brace (Gibson motorsport inspired) to support turbo and prevent stud flex/warpage

 

This setup worked really well and I am only selling as I have put a 6boost manifold on.

All you need is a Turbosmart HyperGate 45 and the dump/ wastegate pipe should all line up.

 

$300 ono for the whole lot.

 

Located Blacktown, NSW.

PM for more details.

3.thumb.JPG.8b197f891ac2ff2fac41e02ad2781030.JPG5.thumb.JPG.52e1239926d1b13648839a1b3e32b516.JPG6.thumb.JPG.410a418d2edd85d0eafe753ec0d47b0d.JPG7.thumb.JPG.15d3278938670d89230d706219661990.JPG

 

1.JPG

2.JPG

4.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...