Jump to content
SAU Community

Recommended Posts

Yeah good on them for being the guinea cops at that kind of expense, that is a LOT of unproven turbo to jump into using on a 2.8litre turn-corners-car.  Will be very interesting to see how they perform in the real world, they do definitely seem to be not shy of pumping some air!

  • Like 1
On 6/7/2018 at 7:36 AM, mr_rbman said:

Looks like the Integrated Motorsport Time Attack R34 GTR is going to twin Garrett new series turbos from a single EFR (9180 from memory) shall be interesting to see the differences, obviously custom everything, manifolds etc....

Nice cannot wait!

Will be fitting a 550.72wg to a very basic config SR20VET later this year. 

Low comp, P11/VET cam combo, franken DET/VE intake, hypex ex side. Will try access above 8000 RPM on Piss98. Hope to move close to 50lbm.

Yes, Lithium, I am still alive. I also have an R33 GTR. 

Posting for sake of what they look like in the flesh. This was the first one delivered to a customer in Aus (me). It is a highly finished product compared to last gen, I have handled all manner of GTX and EFR in the last 2 years and can say these are the prettiest. I hope it's pretty good rather than pretty average. 

Stay tuned. 

IMG_20180109_181956.jpg

IMG_20180109_182158.jpg

IMG_20180109_182143.jpg

IMG_20180109_182134.jpg

IMG_20180109_182016.jpg

IMG_20180109_182004.jpg

This may be the integrated motorsport set up mentioned earlier... look like an amazing setup regardless, sporting a bunch of local Platinum fruit [emoji1362]?

 

 https://www.facebook.com/545029935656927/posts/989437111216205/

 

 

IMG_2236.thumb.jpg.f5c4e669217ad06f6924996ecbb6a1dd.jpgIMG_2237.thumb.jpg.d85a67280c57bc2f5a8edbd1922ac82e.jpg

 

  • 2 weeks later...

Cut and paste post from Facebook:

Probably one of the easiest to compare, this shows boost, torque and power for a G25-660 (solid lines) vs a Gen2 GTX3076R on an EVO.

Very solid power from the frame, but not what you'd necessarily be expecting spool wise from a "2867 sized turbo"

IMG_4795.jpg

Cut and paste from Facebook:

Same car, comparing with the GTX3582R it had on it earlier. THIS case shows a substantial spool improvement, but obviously needs more boost to make the same power - while it did match the GT30 psi for psi.

No question it flows very much like a GTX30 series turbo, but would have been nice if the boost threshold was much like the GT28 sized turbos like the naming would have you hope

IMG_4796.jpg

  • 1 month later...
On 8/14/2018 at 9:01 AM, Snara said:

Anyone have experience with Garrett GTW3684R ? 

That's actually a GTW range turbo, a little off topic in here - but I've seen VERY little for the GTW range, most you can find is the GTW38s.  

  • Like 1
1 minute ago, sneakey pete said:

Apparently the twin G turbo engine made 1050 hp on the dyno with a little worse down low than the 9180 it replaced, 
probably not a bad result given the extra few hundred hp it picked up

Yep, pretty much as expected really - initially I thought they were saying they expected better spool than the EFR9180 which seemed like a tall ask... but it sounds like as you say, it's a reasonable amount laggier but makes >100hp more (not sure about a few hundred).  In the scheme of things - they are more turbo, they're laggier, and they make more power.

One of the more impressive things about the comparison for me was that apparently the twin G25s give nothing away to the Precision 6870 they tried, but makes more power and the 6870 fell on its face after 8000rpm - while the G25s hold on past 9000rpm. 

So yeah, as expected the G25s aren't really cooking until will into the 5000rpm range but if you've built it to rev like hell and they are holding up high then it sounds to match what they were looking for to a T.  

 

 

 

Not a long term proposition (for engine life), currently doing a durability run on 9180 (~1000bhp) with 3.4. Aiming for 20 hours, which is a topic not discussed or understood by most be it by deception or ignorance?.

The higher rpm required for twins along with associated exponential drop in engine life running it this way means we pretty much shit canned the idea ;)

7 minutes ago, RICE RACING said:

Not a long term proposition (for engine life), currently doing a durability run on 9180 (~1000bhp) with 3.4. Aiming for 20 hours, which is a topic not discussed or understood by most be it by deception or ignorance?.

I am sure they know this, and I am sure a good percentage of the people discussing this realise that - I doubt it is either deception or ignorance so much as just like top level drag racing, time attack is pretty much getting the most you can out of a setup while still HOPEFULLY having it hold together long enough to get a result.  Its clearly not going to be an endurance engine... though those reasons are why I assumed when they said "more drivability/wider power delivery" that they were hoping it'd be more responsive earlier - not at the drag racing end of the rpm range.

It kind of backs up a lot of initial discussions of these turbos, considering wheel size wise they are comparable with GTX2867Rs or SMALLER than Trust T517Zs - they are not spool monsters by any stretch of the imagination, the G-series don't seem like a threat to EFRs in their realm however for this car the logic in why they went for them seems sound... so long as they can hardness the power delivery and keep the engine together long enough to achieve the results they are aiming for.

 

The RB34/EFR9180 combo sounds like fun!  What kind of rev range will that operate in?  In Evo world from memory the "more reliable" setups tended to be shorter stroke/longer rod combos (so nearer stock displacement as opposed to 20% more than stock) resulting in slightly less displacement - the bit of extra rpm needed to make a given power level usable was considered to often be a better reliability trade off from the effects come from the lower rod/stroke ratios the strokers resulted in.

Edited by Lithium

These guys (Integrated / PMC) are building a car to be damn quick, not reliable longevity...

They have even gone to the extent of now running alloy rods purely to save weight etc...

They want to win WTAC oz, end of story...

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...