Jump to content
SAU Community

Garrett G Series

LaurelPWR

By LaurelPWR,
in Engines & Forced Induction

 Share

Recommended Posts

Lithium Grand Master

Lithium

Posted
Posted (edited)
2 minutes ago, Phat_Toni said:

Very interested to see how the G30 based turbos compare to the GT30 based turbos in terms of response. Im expecting response somewhere between GT30 and GT35 in comparable housing sizes...time will tell

A mate is going to be trying a Gen2 GTX3076R with 1.01a/r hotside and a G-series turbo for comparisons sake, not 100% sure which but it seems like it could end up being a G30-770 with .83a/r hotside (most similar flow rating to the 1.01 GT30) on a built SR20VE.   That should be a relatively interesting comparison.

Edited by Lithium
  • Like 5
  • Replies 589
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Lithium
Lithium

First time Garrett has released something which has given me a flicker of excitement in a long time, at least based on the information they've given so far and the clear effort that they've put in.  T

GTSBoy
GTSBoy

My opinion on big rears? They gotta be the right size.

Piggaz
Piggaz

Go downstairs, start your car and put your hand on the turbine housing at idle. Please take a video. ?

Posted Images

No Crust Racing Grand Master

No Crust Racing

Posted
Posted
4 hours ago, Lithium said:

A mate is going to be trying a Gen2 GTX3076R with 1.01a/r hotside and a G-series turbo for comparisons sake, not 100% sure which but it seems like it could end up being a G30-770 with .83a/r hotside (most similar flow rating to the 1.01 GT30) on a built SR20VE.   That should be a relatively interesting comparison.

I'd like to hear those results... 

Phat_Toni Contributor

Phat_Toni

Posted
Posted
On 18/07/2019 at 12:11 PM, Lithium said:

I saw a post on Sinco NZ's Instagram page which made me think of you, how is your build going?  Did you end up going Sinco for the manifold or is there someone else doing similar?

Progress pic...Snapchat-1139584873.thumb.jpg.a226fa3f2b7d36ee8c75b5e3d340a30f.jpg

  • Like 4
robbo_rb180 Grand Master

robbo_rb180

Posted
Posted (edited)

G30 660 and 770 at jamboree last weekend. Asked about t3 or t4 housings possibly in the future but only doing vband housings for now. They are a direct bolt on replacement for g25 series too. 

IMG_20190824_131819.jpg

Edited by robbo_rb180
More info
  • Like 2
discopotato03 Grand Master

discopotato03

Posted
Posted

I was just looking at the dimensional drawings at the ATP site , it appears that Garrett have used three slightly different compressor housings .

The G25-550/660 and G30-660 use a 0.70 AR housing , the G30-770/900 and G35-900 a 0.72 housing , and the G35-1050 a 0.75 housing . From memory their diameter's are around 170 190 and 205mm .

A

  • Like 1
Skylineusa Explorer

Skylineusa

Posted
Posted
12 hours ago, robbo_rb180 said:

G30 660 and 770 at jamboree last weekend. Asked about t3 or t4 housings possibly in the future but only doing vband housings for now. They are a direct bolt on replacement for g25 series too. 

IMG_20190824_131819.jpg

So, are they going to be doing the T4? Or did they not answer the question? I sure hope so. 

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted
43 minutes ago, Skylineusa said:

So, are they going to be doing the T4? Or did they not answer the question? I sure hope so. 

They said no at the moment. Maybe in the future. Would have liked to try one in t3. 92 on a Rb25 

Yaji Newbie

Yaji

Posted
Posted (edited)

I have a G30-900 0.83 on order with an 8-10wk wait,currently 2wks in, the anticipationis killing me, but just to top it off I had purchased a GTX3584RS the day before they were released ??? so I returned it for the G30-900 instead. I don't mind dropping up to 100HP for farrr better spool. I anticipate 700awhp out of my 2.4L built MPS. The big cams and the oversized pistons should get it spooling early, tbh my biggest worry is that it might choke it up top

Edited by Yaji
  • Like 1
  • 1 month later...
Plattsy Grand Master

Plattsy

Posted
Posted

hey fellas, just had a read thru. thought id chip in.

 

ive been running the .92 g25-660 for about a year now. semi closed forged ej25. amazing turbo, spool, mid range everything. almost as responsive as the tiny factory td04.

 

in my humble opinion, this is too small for an rb. you'll get mad response, but no top end.

 

runs about 340awkw at 26 psi. under very strict controls, pulled timing, torque limit etc.

clutch and semi closed engine holding us back. still makes 100kw at 95kph, and 200 kw at 110kph.

 

have since exploded that clutch, now have a new twin plate on there and a more efficient cooler. if i get it back on the dyno any time soon, ill drop back round to post the sheet.

 

we also, have a sleeved ej28 stroker in the build hopefully to have a g30-770 or g30-900 attached to it. with the current wait times, and gcg having the monopoly (and also charging full price upfront to non traders) it could be a while. once MTQ has stock, we will be all over it.

  • Like 3
  • Thanks 1
Full-Race Geoff Rising Star

Full-Race Geoff

Posted
Posted
On 10/14/2019 at 8:39 PM, Plattsy said:

ive been running the .92 g25-660 for about a year now. semi closed forged ej25. amazing turbo, spool, mid range everything. almost as responsive as the tiny factory td04.

that is great feedback!  I absolutely love the G25 with 0.72.  The 0.92 flows a ton (very impressive actually) but did have some response loss.  I would love to see any boost logs you can share. 

and if you wanted to try G30-770 we have them in stock at full race

Plattsy Grand Master

Plattsy

Posted
Posted

here are the dyno results. incredible spool, amazing torque and a very long power band (for a subaru)

 

28psi by 3800 rpm. thats plenty of response! unfortunately the stock heads are killing me with its tiny cams and weak springs. would like to see this with 272s springs, and a 4 inch exhaust.

 

i raced it at the weekend in the local sprints. such an amazing car to drive. cannot talk highly enough about this turbo!

 

edit the previous run of 340kw was done at a higher ramp rate. it was dropped to 10 for this.

 

on the shoot out mode that some "tuners" like to print out, should made 370kw at all four. gotta love dynos :)

dyno.jpeg.1083cf29d95ef5d37b71fbd98215382d.jpeg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Neostead2000
      Water leaking into the rear trunk

      By Neostead2000 · Posted

      Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • Ozdavroz
      Lifted R32? Jay (LowStandards) has you covered.

      By Ozdavroz · Posted

      I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • GTSBoy
      WTB-R32 gtst front bar-sydney

      By GTSBoy · Posted

      Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...