Jump to content
SAU Community

abandoned/stolen R34 in Ballarat,Vic

oxford1327

By oxford1327,
in Victoria

 Share

Recommended Posts

oxford1327 Experienced

oxford1327

Posted
Posted

would like to inform anyone of an abandoned/stolen White R34 Skyline in Ballarat, Victoria, car has no plates and looks to be a bit worse for wear, has apparently been in its current location for a few days, I only saw it today for the first time.

I will try to get some photos of the car tomorrow morning if it is still there and attach them to this post.

all I can tell at this stage is it's missing the plates and looks as if its had a bit of a rough time, it is parked on the side of the road in Gillies street Wendouree, near the intersection of Gregory st close to the train lines headed in a southerly direction.

Admin please advise if there is a better place to post this as i don't know if there is a stolen sticky anywhere?nothing came up in search for stolen.

Link to comment
https://www.sau.com.au/forums/topic/472896-abandonedstolen-r34-in-ballaratvic/
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      1. Factory knock sensors for now, honestly the RB26 OEM knock sensors seem ok as they're flat response instead of resonant type but they appear to be internally grounded to the block. If I do replace the sensor it would just be to get ones that are not internally grounded so a differential input can be used to reject common mode noise. Definitely plan on fixing this as a part of the tuning process. 2. Never deliberately induced knock, though I guess I could try that experiment if I really wanted to. 3. All of this is basically on a stock engine + ECU, only modification is HKS GTIII-SS turbos and a Nismo plenum. Currently I run it with the wastegate solenoid unplugged so it won't try to raise boost past wastegate pressure.
    • niZmO_Man
      CoD:BO6

      By niZmO_Man · Posted

      After being peer-pressured into paying $100 for the MW remakes, got BO6 on XBox Game Pass. I think that's worth it.
    • niZmO_Man
      I for one welcome Nissda.

      By niZmO_Man · Posted

      HoMoArt!
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      That's a given!  Bit hard to powdercoat it properly without removing them! 😁
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      No detail on compressor or turbine sizes, which doesn't help with housing size selection with that kit. However, from SR20DET mucking about and money torching perspective, a GTX2860R Gen 2 w/ 0.64 (46mm inducer) will do ~260kW on E85 about 1.5bar of boost. All in before 3000pm, which cause a gearbox to shatter. Now imagine the same turbo, on a modern motor with an extra 0.5L of displacement, and heaps of cam timing adjustability (not an on/off affair like the Nissan shit boxes). If this was my car (which I would never own or consider buying, ever!), I would go for a nice twin scroll setup, and a G30-660. Gates plumbed back, no silly shit. Lean on the cam timing, big displacement to create a flat-ish torque curve.  
×
×
  • Create New...