Jump to content
SAU Community

Recommended Posts

So they have been kicking around for a year or two in some cars and looks like a few of us have taken the plunge and made a purchase so just wondering what information is out there.

6 speed sequential that fits inside the standard GTR 5 speed case and bolts straight in. Got a nice load cell and rotary position sensor so you can set up closed loop flat shifts with a decent ECU. Gear ratios seems very sensible and friendly at 2.706 / 1.894 / 1.471 / 1.184 / 1.000 / 0.812 but have no options. Big 26-spline input shaft so requires a new clutch and rated at over 1000hp. Fair bit cheaper than a Holinger (with all the extras you need), Albins (which needs to have floor cut) and around the same price as an OS88 but with a lot more tech.

Seems they have run into a few issues along the way but have been quickly fixed under warranty and new versions have been introduced to fix. Claims of 38ms shifts (probably more like 50ms) is still crazy fast if set up correctly.

Who is running one? How easy was the ECU set up for flat shift? Anyone keen to share some experience or settings?

ppg%20sequential.JPG

 

Edited by SimonR32
Link to comment
https://www.sau.com.au/forums/topic/473151-ppg-6-speed-sequential-for-gtr/
Share on other sites

21 minutes ago, Griffin said:

How much are they? ( I've heard the saying re if you need to ask you can't afford).

How user friendly street wise are they?

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

  • Confused 1
1 hour ago, sneakey pete said:

Is that a drive away price?
eg clutch, wiring tuning ecu around it etc? Or just the cost of a completed box?

No clutch.

No installation.

No tuning.

You get that.

0E157731-7EBC-4C10-B668-B13633D9B34B.jpeg

20 hours ago, Piggaz said:

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

I swear they have just jumped in price on High-Octane website?

 

9 minutes ago, SimonR32 said:

I swear they have just jumped in price on High-Octane website?

 

I bought mine when they dropped the price to $19,800. That doesn’t include the housing, shipping or assembly. It has gone back upto the “normal” price again.

  • Like 1
  • 2 weeks later...

So they definitely (in my case anyway) don't bolt straight into stock housing. There is 3 places that need clearancing, 2 for the selector forks and 1 for 6th gear. In saying that, a die grinder and flapper wheel makes it reasonably easy and not too time consuming.

20180128_120341.jpg

20180128_120332.jpg

  • Like 2
  • Thanks 1

For some info on setup you could try b2r motorsports in Ingleburn nsw, they have a fairly big build r32gtr with the ppg in it. Set up very nicely with a link ecu. they ve spent a lot of time getting it right. And it works very well. B2R Motorsports fb page has some videos of it.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...