Jump to content
SAU Community

Recommended Posts

So they have been kicking around for a year or two in some cars and looks like a few of us have taken the plunge and made a purchase so just wondering what information is out there.

6 speed sequential that fits inside the standard GTR 5 speed case and bolts straight in. Got a nice load cell and rotary position sensor so you can set up closed loop flat shifts with a decent ECU. Gear ratios seems very sensible and friendly at 2.706 / 1.894 / 1.471 / 1.184 / 1.000 / 0.812 but have no options. Big 26-spline input shaft so requires a new clutch and rated at over 1000hp. Fair bit cheaper than a Holinger (with all the extras you need), Albins (which needs to have floor cut) and around the same price as an OS88 but with a lot more tech.

Seems they have run into a few issues along the way but have been quickly fixed under warranty and new versions have been introduced to fix. Claims of 38ms shifts (probably more like 50ms) is still crazy fast if set up correctly.

Who is running one? How easy was the ECU set up for flat shift? Anyone keen to share some experience or settings?

ppg%20sequential.JPG

 

Edited by SimonR32
Link to comment
https://www.sau.com.au/forums/topic/473151-ppg-6-speed-sequential-for-gtr/
Share on other sites

21 minutes ago, Griffin said:

How much are they? ( I've heard the saying re if you need to ask you can't afford).

How user friendly street wise are they?

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

  • Confused 1
1 hour ago, sneakey pete said:

Is that a drive away price?
eg clutch, wiring tuning ecu around it etc? Or just the cost of a completed box?

No clutch.

No installation.

No tuning.

You get that.

0E157731-7EBC-4C10-B668-B13633D9B34B.jpeg

20 hours ago, Piggaz said:

All said and done (if you get them to assemble it which was $1,700 alone), it’s about $23,500. That includes supplying your own case, shipping from SA to Sydney.

Not cheap by any means.

I swear they have just jumped in price on High-Octane website?

 

9 minutes ago, SimonR32 said:

I swear they have just jumped in price on High-Octane website?

 

I bought mine when they dropped the price to $19,800. That doesn’t include the housing, shipping or assembly. It has gone back upto the “normal” price again.

  • Like 1
  • 2 weeks later...

So they definitely (in my case anyway) don't bolt straight into stock housing. There is 3 places that need clearancing, 2 for the selector forks and 1 for 6th gear. In saying that, a die grinder and flapper wheel makes it reasonably easy and not too time consuming.

20180128_120341.jpg

20180128_120332.jpg

  • Like 2
  • Thanks 1

For some info on setup you could try b2r motorsports in Ingleburn nsw, they have a fairly big build r32gtr with the ppg in it. Set up very nicely with a link ecu. they ve spent a lot of time getting it right. And it works very well. B2R Motorsports fb page has some videos of it.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I clean my wheels every time I wash the car, I also clean the barrels, the only product I use on the wheels is truck wash and a pressure washer, followed by (inset your chosen name brand) wash and wax, time per wheel is probably 2 minutes total, cleaning the barrels is easy with one of these microfibre thingies on a stick from Sabco, they're also great for getting in between the front guards and body, and tight spots in the engine bay  
    • An updated post here. Sounds to me like there's definitely a bit of sketchiness here.  Old mate with 10 rusting Torana's in the front yard might be more who they're focussed on. (For right or wrong).
    • Is this not just about people wrecking, and storing, multiple cars in their front yard? I now a tow truck driver that was contracted by the council to clean up housing commission front and rear yards in houses and unit car parks I'm all for working on, and doing maintenance on your car in your garage or driveway, but some people definitely take the piss  There's one house locally to me that I walk past regularly where the front yard and driveway looks like a wreckers, multiple cars in various stages of being stripped, and the yard looks like all of fluids are basically dumped on the ground I may be wrong, but it seems that the initial reports, which I've seen nothing actually official about yet, may be getting taken out of context, like alot of the latest "the sky is falling" stuff found on the youtubes for clicks
    • have they? Link appreciated. I live in Casey. I can see both sides of the argument in this case. There's a lot of sketchy stuff going on. There needs to be a clear definition of what this is supposed to be IMO. I wager the intent was to be a broad sweeping brush against people who have 4 cars up on blocks on their front lawn, not someone who services their own car behind their own gate on a weekend bothering probably nobody. But it'd be hard to legislate the difference there.
    • Oh, the wheels were already off. I wouldn't normally take them off to clean them although it does make it easier with the ceramic, so I might take them off when reapplying. I don't drive much but now with the ceramic coat, when I do drive and they get dirty I can get most off with the pressure washer. I'll be switching to dirtier pads soon which was the motivation for the ceramic as I usually just clean them and sometimes use Autoglym wheel protector. Nah, f**k the barrels! Haha, I'll give them a quick scrub when they're off the car and a pressure wash, but even I draw the line with the barrels. Yes, dark coloured wheels allow you to get away with a lot!  
×
×
  • Create New...