140A alternators kit for rbs

[rat32r]

I’m in Darwin, is it easier for you to text or call me so we can get the ball rolling?

Pm sent
If Anyone else want to get in contact
Easy my number is 0417677905

[oxford1327]

Received my kit yesterday, and fitted it up this morning, took a couple of hours to do from start to finish including removing old standard unit. 

Everything bolted up perfectly and lines up spot on, great quality and an excellent upgrade for the electrical system ready for any added extras down the road. 

Personally I found the best course of action for fitment is to drop the old unit off through the gap between the radiator shroud and the power steering lines etc, and have the extension bracket mounted to unit not fully tightened, that way you can wriggle stuff around when lifting the new one up through the gap, hardest bit, and part that illicits the most cursing of engineering design etc. Is the placement of the lower pivot bolt, you can either see it, or you can get a hand in there to fit it, Never both! Once bottom bolt is in the rest is easy as. 

Electrical system is now a lot more stable and also a bit quieter on the belt noise level with the new pulley too, so I will be recommending this kit to all of the local jdm nut bags and passing them the info/links etc. 

[Old man 32 GTR]

Yep, 100% agree, ive only recently got my car back from the workshop so haven’t done a heap of driving but I’ve already noticed the electrical system is better, before with lights on and stereo on I would see a drop in voltage and that was only running one fuel pump. I’m now running three pumps, no issues, no volt drop.
Very happy customer here.
But I didn’t fit it, I had the workshop fit it.

[oxford1327]

11 hours ago, Old man 32 GTR said:

Yep, 100% agree, ive only recently got my car back from the workshop so haven’t done a heap of driving but I’ve already noticed the electrical system is better, before with lights on and stereo on I would see a drop in voltage and that was only running one fuel pump. I’m now running three pumps, no issues, no volt drop.
Very happy customer here.
But I didn’t fit it, I had the workshop fit it.

3 fuel pumps? jeebus I'd hate to have your bloody fuel bill hahahaha, 2 questions... why 3 pumps? and secondly are any of them a "drop-in" upgrade that aren't as loud as a rotary13B sitting in your boot?

I might look at doing a pump and reg upgrade in the future but don't want a massively loud thing resonating in the wagon, so I'm looking for recommendations of an in-tank minimal fuss type of thing, any suggestions?

[Old man 32 GTR]

Fuel system was done by DVS Tuning, radium surge tank with twin walbro 460’s staged and another walbro in the main tank feeding the surge tank.
It’s unbelievably quiet, I’m very happy with it. Supports my 500kw and is good for substantially more should I wish to pursue more power in the future.
This is why I upgraded the alternator

[SimonR32]

I'm the same, having issues since going twin walbro 460L

Kit should be on the way so over nearly double the amps plus 27 years younger should help

[Komdotkom]

I got my kit last week, simple to fit and very nicely made. Certainly a much better option than bespoke jap units, I got a brand new Bosch 140a delivered for $223.

[cul8er]

Anyone have to do a power cable to support the extra 70a due to bigger alternator ?

[oxford1327]

22 hours ago, cul8er said:

Anyone have to do a power cable to support the extra 70a due to bigger alternator ?

mine already had much thicker cable than standard due to the car having a uber-ridiculous stereo system in it when i got it, but can buy 200amp rated cable  10mm thick in super cheap which is about $8-10 a metre that'll be more than up to the task, then go to an electrical wholesaler or battery shop for the crimp on ends

[NEO25T]

Unfortunately i didnt get to meet Andrew as a mate picked up the kits for me but he was very helpful and easy to deal with.

The kits look great and im very happy thankyou ?

[MrStabby]

Just fitted a rat32r kit with an alternator he supplied. Very nice kit and straight forward instalation. Idle voltage has gone from 14.2v to 14.45v. The Attessa light is staying off now, so the only remaining issue is the ABS.

[rat32r]

Another kit fitted

[rat32r]

[danny14]

Pmd you rat32r

[danny14]

Just fitted a rat32r kit with an alternator he supplied. Very nice kit and straight forward instalation. Idle voltage has gone from 14.2v to 14.45v. The Attessa light is staying off now, so the only remaining issue is the ABS.

Do you know how i can get hold of rat32r i have messaged him on here with no response

[rat32r]

Do you know how i can get hold of rat32r i have messaged him on here with no response

Pm sent
Any one else needs to contact me the quickest way is on 0417677905

[rat32r]

New batch made

[discopotato03]

Would it be possible to see a pic of an RB spec Mitsubishi Alternator next to the LS Mitsy one please .

I'm very interested in this kit but just curious to see if the LS one is larger in diameter compared to the Nissan supplied one .

Mine would be for an R33 spec RB25DET .

Thanks in advance , cheers Adrian .

[rat32r]

The LS1 is physically bigger, I'll try get a pic for you in the next few days don't keep stock RB laying around as they go in the bin [emoji23][emoji23]. Will get one from a customers car. Kit fits all RB engines

[rat32r]

Here is a pic of pulleys to Show the differing offset
Ls1,RB , CWC pulley