Jump to content
SAU Community

Recommended Posts

The ECUTEK has RACEROM, the rev match is enabled (I am really bad at heel toe) this does it for you.

Also has flat foot shifting enabled ( ECUTEK uses both fuel cut and ignition retard working together), if it was just fuel cut I wouldnt use it, I like my pistons, if it was just ignition I wouldn't use it as I like my turbo.

 

It has launch control, but this feature has never been enabled.

I may be interested in a mint original AUD S15 with cash my way.

Minor mods are good but......

Disclaimer: No pi gs, no respays, no 400hp fully dayglow spec with body kits, no prior accident repairs.

I will have it checked out with a fine tooth comb.

I have been looking around lately at S15's, I want a good one though, and by good I mean mint, the better the car the less cash my way.

Example: I missed out one 2 years ago, it had 4k original km on it and it sold for 28k.

Both cars will end up at a local shop for inspection, Pulse Racing is close to me.

  • 2 weeks later...
  • 3 weeks later...
On 5/14/2018 at 2:25 PM, The Panda said:

If you are looking for a p-plater fun weekend car - I have an AP1 S2000... 4.44 diff and some other fun stuff. I need a more work appropriate car :(

Shoot me a email with some more info and pics mate. How much do you think the S2000 is worth realistically.

On 5/14/2018 at 2:25 PM, The Panda said:

If you are looking for a p-plater fun weekend car - I have an AP1 S2000... 4.44 diff and some other fun stuff. I need a more work appropriate car

Thanks for the email

 

Your car looks sweet but sadly not what I am after.

 

I wish you luck with your sale.

 

Cheers

  • 2 weeks later...
  • 4 weeks later...

Keen to hear your thoughts on the 86, coming from the STI, by the looks you got the limited ed. ver with the brembos, sachs and updated diff? 

Really liking these at the moment, just finding it hard to find $30K from the back of the sofa.

On 6/28/2018 at 10:03 AM, JGTC said:

Keen to hear your thoughts on the 86, coming from the STI, by the looks you got the limited ed. ver with the brembos, sachs and updated diff? 

Really liking these at the moment, just finding it hard to find $30K from the back of the sofa.

So far so good, I replaced the Michelins with some RS4's today, should be good once they are scrubbed in, I had some RS3's on my MX5 and liked them alot.

In the couple of days I've had it I'm loving it, even with the crappy Michelins it was a hoot, it's good to be back in a light(ish) RWD platform.

Power wise it wouldn't pull the skin of custard, but that not the point of it, or why I got it.

Wringing its neck, throwing it into a corner, playing with some oversteer is so much fun.

I also grabbed a cat back for it, a XForce 2.5" jobbie, sounds alot better, well you can hear it now anyway, with the stock cat back I couldn't even hear the exhaust, I estimate the power increase from the cat back is an astonishing 0%.

So, for future mods, some alignment bolts from whiteline are on the cards, stock camber adjustments are non existent, apart from toe, stock camber is 0.0 deg, I'm going to hammer some corners and see what the tyres are saying and dial some in from there.

Cheers

  • Like 1
On 7/3/2018 at 9:31 AM, JGTC said:

Awesome, good to hear Mark, i totally agree with you on that simple layout is best as i get older, more fun at less speed with less to go wrong.

Camber bolts only gave me -0.5 with them maxed out, rears are -1.3 L and 0.97 R (not adjustable).

I'll try some 14mm lower camber bolts for the front and see where that puts it, if all else fails I will grab some strut tops as well, I will grab some adjustable arms for the rear.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
    • If you do make them, im sure you would have a number of buyers.. Every GTR I've been in have rattly door windows 
×
×
  • Create New...