Jump to content
SAU Community

Boss kit for an aftermarket steering wheel

nissaner

By nissaner,
in Four Door Family & Wagoneers

 Share

Recommended Posts

sky80 Rising Star

sky80

Posted
Posted

it's all the same...the boss kit i used on my r32 was off my first 180sx (only hicas s13 will fit skylines)....which is now on nissaner's a31. My non hicas boss kit fits also, but i couldnt be bothered to take my old steering wheel off it.

Link to comment
Share on other sites
sky80 Rising Star

sky80

Posted
Posted

signal dont switch off because of these two little plastic/metal pin like things...it's hard to explain....but if you have stereo volume and cruise control on the steering wheel, then nothing will work. you'll have no horn, no auto signal off, no cruise control, and no volume control...

if it's hicas w/o all the buttons on steering wheel. the a normal hicas boss will work. and same for non-hicas models with non-hicas boss

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      PRP RB26 cast block + head prototype running

      By GTSBoy · Posted

      Nah, it's not the reduced knock margin. It is a direct mechanical effect of having to initiate the combustion earlier, while the piston is still rising, which starts to exert combustion pressure on the rising piston earlier, making the rest of the engine work harder to finish driving the piston up to TDC where the combustion pressure stops being a negative and starts being a positive. Your modern engine that only needs ~10° to make MBT doesn't waste the other 10 or so degrees of crank rotation. That's almost all of it. The difference in knock margin might go either way. Remember that modern engines to which you are currently comparing the long tractor engine (the RB) are now running super high compression, direct injection, tricky cam control and maybe even cylinder pressure sensors. You're not comparing apples with other fruit. It's apples and sea weed, or some other evolutionarily primitive vegetation. And remember, squish only really comes into play at the very end of the stroke. It certainly does good things, but it is not the biggest contributor to what's going on. It is quite possibly much less important in 4 valve head than 2 valvers also, because there is so much less squish available to a 4 valve anyway.
    • Dose Pipe Sutututu
      PRP RB26 cast block + head prototype running

      By Dose Pipe Sutututu · Posted

      Food for thought, a longer stroke motor would need less ignition timing vs. a shorter stroke motor requiring more ignition timing.
    • PranK
      Skid pans in/around Sydney?

      By PranK · Posted

      Thanks Duncan, HART is only 10 mins from me (I did my bike license there), it'd be awesome if it ran these types of things.  Sutton Road does look good and they take fewer cars than SMSP which is good.  Surely you have enough land to lay a few million tonnes of concrete and some sprinklers D? 
    • joshuaho96
      PRP RB26 cast block + head prototype running

      By joshuaho96 · Posted

      I thought an engine that needs more ignition timing to make power is going to result in less power due to reduced knock margin? More time for the combustion to propagate -> more time for it to heat up the rest of the mix to detonation.
    • defari
      Destiny 2

      By defari · Posted

      DCS, war thunder, IL2 - mostly flight sim games.
×
×
  • Create New...