6 boost top mount and external wastegate

[Eager]

I’m installing the 6 boost top mount setup on my neo. Using a turbosmart wastegate. Anyone any pics of the routing of there wastegate pipework etc ? How far away is the wastegate from the manifold etc ?

 

[NEO25T]

Here is my one thats just about done. I changed my mind on how the pipes were routed every 10 mins while making it lol, if i was to do it again i would use 4 inch pipe instead of 3.5 and maybe give a touch more clearence between gate and exhaust. It has about 1/2 inch clearence now and i wanted to keep the exhaust as far away from the abs, heater and ac.

Wastegate pipe just goes down and plumbed in before the cat, has a flex joint in there too.

[KiwiRS4T]

6 Boost should be tailor making the wastegate mounting for you and should know what is required for your car.

[Eager]

Not in the uk

we get the manifold and are required to make external wastegate pipe to suit

[NEO25T]

4 hours ago, Eager said:

Not in the uk

we get the manifold and are required to make external wastegate pipe to suit

This one is just of the manifold to show wastegate outlet port if it helps you any.

[Eager]

So you mount the wastegate to that v-band then pipe it away  

cheers

[NEO25T]

You got it ?, turbo on top one wastegate on the side

[KiwiRS4T]

Wastegate set up on my Stagea - welded to turbo not (Sinco) manifold:

 

[Dose Pipe Sutututu]

^ sexy, but double sexy if was twin scroll