Jump to content
SAU Community

Recommended Posts

yeah i am sure its the turbo spooling although, its not like usual, like i have the usually loud sucking sound from the pod, although now i can hear a slight whistle also. only just started happening, kinda sounds electronic in a way. and i can still hear it even when my engine is warm.

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957256
Share on other sites

I had an odd whistle/hissing sound in my car. Took the heat shield off to investigate & found that only 2 of the 4 bolts holdin the turbo to the exhaust manifold were there! Found 1 on the chassis rail

Fixed this up & the whistle/hissing sound stopped, leaving just the sweet sound of spool up :(

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957288
Share on other sites

When i blew my old stock turbo a while back, it made a VERY LOUD whistle sound kinda like that of an electric motor but LOUD, engine would run, but car wasn't in a driveable condition, drove like 40km/hr up to 60km max hoping that the rest of the turbo wouldn't fall apart and go into the engine..

anywayz. get it checked my friend if its not performing like it normally does,

my 2c

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957295
Share on other sites

huh?? it interferes with the radio?? maybe its just the whining in the cables of the stereo or whateva that whinning sound is, most people get it when they have put a stereo in their cars if you know what i am referring too.

Boy it must be fairly loud to here it over the pod though as pods suck very loudly, i guess if your worried you could get a mecahnic to check over things for you to be on the safe side

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957301
Share on other sites

Should be fine. just don't want to hear the turbo spinning when you've turned the engine off. :(

Yes you do! Helloooooo super smooth BB :)

Anyways.

Our skyline makes a noise like a rusty gate opening (but urm quieter?) if you let it slowly come off boost. Just at the point where I assume the turbo is starting to slow down again you hear it. Car still makes 1bar (1.2bar on occasion, oops, yay AVCR and its super non-spiking properties) and performs well though.

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957354
Share on other sites

i think i know what you mean and i have the same noise. i installed a catch can on the inlet manifold and the afm pipes and mounted them on the fire wall and the sound is much more audible through the car now. not too sure what it is, maybe the PCV valve opening and closing?

-rb25

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957813
Share on other sites

i can hear my turbo spinning when its cold in the mornings (when im trying to keep it off boost while it warms up, sometimes it creeps onto boost and i can hear them spinning heh)

I got the same thing, till it heads up then is normal spoolin noise. But i got 2 bolts that hold the the exhaust manifold to the head missing (dunno how) but she still spool up.

my 2c

Link to comment
https://www.sau.com.au/forums/topic/47365-turbo-whistling/#findComment-957976
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In all the track days I've done over the past few months I've only had 1 issue with braking and thats with my current EBC pads (can't remember the colour, but they're not a track pad). I don't *think* I have had issues with brake fluid getting too hot, my understanding is that when that happens you will have quite noticeable brake loss - which I haven't had.  I'm using just regular ol' Penrite Super DOT4 fluid. I use this fluid in everything and my cars always seem to stop so I see no reason to change, except ... for the 335i. I need to do a fluid flush and was thinking about my fluid of choice and wondering if I should consider using something more high temp? Its not a super fast car by any standards but I'd hate to do a flush and then find myself with no brakes when I get. to Wakefield.  I guess, my question can be summed up as "How fast do you need to be driving to need higher temp brake fluid?"  I remember high temp fluid was considered a must have back in the day when I had my GTR. 
    • For anyone that comes here looking for answers on what can go wrong with gts-4 to rb25detneo swap. The Gloria's awd sump is different and does not fit. The rb25neo from stagea are exactly the same sump bolt pattern and axel alignment. Castings numbers are different on Gloria's blocks and oilpans if they need to be identified.
    • I have information on this for anyone that comes looking again. https://www.facebook.com/share/p/18gsbFaYTU/ The rb25det neo from the stagea has the same sumo as rb26 and r32 gts4 (and other awd models). The sump that has caused so many problems during swaps are from the awd neo Gloria's. The casting numbers on the block and oil pans are different so this may help identify if you can't confirm where the motor came from
    • Not feasible to fix the boot lid you had? Damage looked minor/hard to even see :p Source: Drove into something recently and you should be happy you didn't!
    • Another new used boot arrived at the painters, it was sent back as there was nearly as much damage as the original one I want to replace  Finding a clean used boot lid is proving problematic, and I'm not keen on dropping $1500 on a new one from Mazda Sigh....
×
×
  • Create New...