Non Hicas pump for RB20DET

[ThatGreyRBS13]

Hi new here from the US and lack knowledge on if there is a non hicas pump I can use for my RB20DET as I tried capping the 2nd port and removing the splines inside the pump and even welding it shut still leaking. I used the search on here all I could find was hicas delete kits for the rear of the vehicle not the pump I could be searching wrong. Any help would be appreciated or a specific part number for the pump I would need.

 

Thank you in advance

[GTSBoy]

Yes, any pump from an R33 onwards RB is single stage only.  There were also R32s without HICAS, although even though HICAS sucks balls, the cars that didn't have it sucked so much that no one cares that they were all crushed a million years ago.

[ThatGreyRBS13]

So they are all the same size r32-r33 theyll all fit my bracket? I just wanna make sure cause on eBay they are like $300 USD plus shipping from overseas.

[GTSBoy]

I can't promise you that the brackets are the same.  Hell, even the hydraulic lines in and out are not going to be the same.  This is not necessarily a bolt-off bolt-back-on affair.  You may have to be prepared to do some work.

[ThatGreyRBS13]

Yeah did some digging there is 2 different brackets that bolt to the engine for hicas and non hicas. The width where the pump bolts to the bracket is different so I ordered the bracket and I'm going to try the KA24DE pump I have with the new bracket

Edited April 11, 2018 by ThatGreyRBS13