Jump to content
SAU Community

Efr 9174 turbo

Griffin
 Share

Recommended Posts

Griffin Experienced

Griffin

Posted
Posted

Selling borgwarner efr turbo. It's a 9174 aluminum chra with t04 twin scroll external waste gate turbine housing and oil drain. 

Bov has been removed / blanked from compressor housing as it was low mounted and not practical. 

Also have 2 new in box 40mm turbosmart wastegates.

Would like to get $3000+ for the lot or $600 for gates and $2600 for turbo.

Owes me around $4k . 

Was setup with old single wastegate . These ones have not been used

Only removed as I'm going smaller and can't justify spending more money on upgrading fuel system and chasing big power numbers.

May swap for something of interest.  Would like an na r33 skyline or stagea.

Sms any offers.

Zero437529050. Literally brand new. As seen in pic sIMG_20180415_102719190_LL.thumb.jpg.d967d1bad0ad7270279337639ab2ab3e.jpgIMG_20180415_102809485_LL.thumb.jpg.1aa493013ce8bb450560158899a0f4de.jpgIMG_20180415_102755729_LL.thumb.jpg.6cabe135011755a01125a1f19db912de.jpgIMG_20180415_103148927_LL.thumb.jpg.2a56ea87bcf8fc94acb1d073435ecf02.jpg

 

Link to comment
https://www.sau.com.au/forums/topic/473795-efr-9174-turbo/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      After drying a few days, time to put her back together 
    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Ahh ok, thanks again for your valued insight Tao
×
×
  • Create New...