Jump to content
SAU Community

Recommended Posts

Hi all,

I did a search and read up on the options around, plenty of recommendations on SAU but very few 1st hand experiences.......I presently have a car bra, but am looking to see if there is something better [aren't we all].

Is anyone able to give longer term first hand experience on any of the options that protect the front of your car from bugs and stone chips etc?

I am sort of happy with my car bra - and yes it does rub, but you can't see it once you put the bra on :) .  It is always a pain putting the bra on and taking it off plus once on you can't open the bonnet....plus the clear sections scratch the headlights [so I have to use removable film and replace this every few months as well]. 

So far I have looked at:

  • car bra - cheap and nasty but does the job at sub $500
  • plastic wrap - not sure on its effectiveness for stone chips plus it is not as permanent, I think you have to frequently renew it
  • vinyl wrap - expensive but seems to work
  • DIY spray on rubbery cover - but I think this is more of a temporary thing
  • plasticoat - seems Ok but would be very expensive.

So am open to trying a new alternative IF IT IS EFFECTIVE.

 

Link to comment
https://www.sau.com.au/forums/topic/473851-front-end-protection/
Share on other sites

There are specific clear plastic products exactly for this.  The same film you see on new cars in spots likely to cop stones, like just in front of the rear wheel arches, trailing edge of back door, etc.

They're still a compromise.  The car looks different/wrong with it spread all across the front.

by car bra are you meaning this sort of thing?

carbra.jpg.1d524a82b19876f44fb59800e6375321.jpg

each to their own of course; I've never understood it myself. Making sure your car looks good for that special occasion in the future by making it look shit every day until then. 

Just budget for a paint touch up in the future if it does get significantly damaged/aged?

Mate when you drive in the country your car gets sandblasted [the edges of the road are just dirt and fine sand that every semi blows up] and covered in bugs [grasshoppers, moths, midges etc] so much that the paint ceases to show through.

And btw my sig has a pic of my Skyline with a bra on it.

Was thinking of the vinyl wrap and clear wrap....but what happens when you want to remove and renew in a few years time???

Is it just a big sticky mess, does it take the paint off as well, or is it an easy thing?

And it is expensive plus I have to travel and stay ...which adds to the expense.

But I agree, the end results look amazing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
    • Silly question, as I bet you've checked already, but the motor turns over by hand yes? I suspect Neil has a spare starter, though if not, I believe I have a spare R33 (or two) starter.
×
×
  • Create New...